Displaying LLDP neighbors

The show lldp neighbors command displays a list of the current LLDP neighbors per port.

The following shows an example report.

device# show lldp neighbors

Lcl Port Chassis ID      Port ID         Port Description     System Name
1        0000.0034.0fc0  0000.0034.0fc0  GigabitEthernet9/1   FastIron ICX 7~
1        0000.0001.4000  0000.0001.4000  GigabitEthernet0/1/1 FastIron ICX 7~
3        0000.0011.0200  0000.0011.0203  GigabitEthernet4     FastIron ICX 7~
4        0000.0011.0200  0000.0011.0202  GigabitEthernet3     FastIron ICX 7~
4        0000.0011.0200  0000.0011.0210  GigabitEthernet17    FastIron ICX 7~
15       0000.0011.0200  0000.0011.020f  GigabitEthernet16    FastIron ICX 7~
16       0000.0011.0200  0000.0011.020e  GigabitEthernet15    FastIron ICX 7~
17       0000.0011.0200  0000.0011.0211  GigabitEthernet18    FastIron ICX 7~

The following table describes the information displayed by the show lldp neighbors command.

Field	Description
Lcl Port	The local LLDP port number.
Chassis ID	The identifier for the chassis. RUCKUS devices use the base MAC address of the device as the Chassis ID.
Port ID	The identifier for the port. RUCKUS devices use the permanent MAC address associated with the port as the port ID.
Port Description	The description for the port. RUCKUS devices use the ifDescr MIB object from MIB-II as the port description.
System Name	The administratively-assigned name for the system. RUCKUS devices use the sysName MIB object from MIB-II, which corresponds to the CLI `hostname` command setting. Note: A tilde (~) at the end of a line indicates that the value in the field is too long to display in full and is truncated.

RUCKUS FastIron Management Configuration Guide, 10.0.20 53-1005805-12

Displaying LLDP neighbors