wlan
To add a WLAN service to the WLAN group, use the following command. Enter this command from within the context of the WLAN group that you are configuring.
Syntax Description
Defaults
None.
Example
rruckus(config-wlangrp)# wlan ruckus1
The command was executed successfully. To save the changes, type 'end' or 'exit'.
ruckus(config-wlangrp)# show
WLAN Group:
ID:
:
Name= wlangroup1
Description=
WLAN Service:
WLAN1:
NAME= ruckus1
VLAN=
ruckus(config-wlangrp)#