Configure WLAN Settings Commands
Use the
config-wlan commands to configure the WLAN settings, including the WLAN’s description, SSID,
and its security settings. To run these commands, you must first enter the
config-wlan context.
In this section:
wlanabortendexitquitdescriptioncalled-station-id-typessidbeacon-intervalwlan-bindEnables WLAN binding on the 2.4 GHz, 5 GHz, 6 GHz, or all the radios.mgmt-tx-ratenametypeopenzero-it-activation- Configure Dynamic PSK Commands
mac none- mac owe
dot1xbgscanclient-isolationallowlistload-balancingband-balancingsend-eap-failurepap-authenticatornasid-typeweb-authgrace-periodacct-serverinactivity-timeoutweb-auth-timeoutvlandynamic-vlanmcast-filterhide-ssidofdm-onlyadmission-control- transient-client-management
- min-client-rssi
bss-minratedtim-perioddirected-thresholdsmart-roamforce-dhcpsta-info-extractionmax-clients- 802dot11d
arcapply-arc-policy- wifi-calling
- url-filtering
- sae-anti-clogging-threshold
roaming-acct-interim-updaterate-limitaclTo configure an L2 MAC/L3/L4/IP ACL with the specified name, use the following command:mac-addr-formatqos classificationdisable-dgafproxy-arp- 80211w-pmf
ignor-unauth-statsft-roamingrrm-neigh-reporthttps-redirectionclient-flow-logclient-connect-logbypasscnashow- wifi6/7Enables wifi6/7 mode on a WLAN.
serviceguess-friendly-keytunnel-modesmart-roam- bss-prioritySets the WLAN Basic Service Set (BSS) priority level.
- qos mirroringConfigures the Quality of Service (QoS) mirroring priority for a WLAN.
- transition-disableEnables the Transition Disable setting on a WPA3 WLAN.
Parent topic: Configuring Master Settings