snmpv2-trap

To enable the SNMPv2 trap and set the IP address of the trap server, use the following command:

snmpv2-trap NUMBER IP/IPv6-ADDR

Syntax Description

snmpv2-trap
Enable the SNMPv2 trap and set the trap server’s IP address
NUMBER
Assign the trap receiver ID (1-4)
IP/IPv6-ADDR
Set the trap receiver IP address

Defaults

None

Example

ruckus(config-sys)# snmpv2-trap 1 192.168.10.22
The SNMP trap settings have been updated.