snmpv2

To configure the SNMPv2 settings, use the following command:

snmpv2

Executing this command enters the config-sys-snmpv2 context.

Syntax Description

snmpv2
Configure the SNMPv2 settings
abort
Exits the config-sys-snmpv2 context without saving changes.
end
Saves changes, and then exits the config-sys-snmpv2 context.
exit
Saves changes, and then exits the config-sys-snmpv2 context.
quit
Exits the config-sys-snmpv2 context without saving changes.
no access-v3
Disables special MIB node for customer's kt.
access-v3
Enables special MIB node for customer's kt.
contact WORD
Enables SNMPV2 agent and sets the system contact.
location WORD
Enables SNMPV2 agent and sets the system location.
ro-community WORD
Enables SNMPV2 agent and sets the RO community name.
rw-community WORD
Enables SNMPV2 agent and sets the RW community name.
show
Displays SNMPV2 agent and SNMP trap settings.

Defaults

SNMP Agent:

Status= Enabled

Contact= https://support.ruckuswireless.com/contact_us

Location= 350 West Java Dr. Sunnyvale, CA 94089 US

RO Community= public

RW Community= private

SNMP Trap:

Format= Version2

Status= Disabled

Support-access-V3:

Status= Disabled

Example

ruckus(config-sys)# snmpv2
ruckus(config-sys-snmpv2)#