name
To set the WLAN group name, use the following command. Enter this command from within the context of the WLAN group that you are configuring.
Syntax Description
Defaults
None.
Example
ruckus# config
ruckus(config)# wlan-group wlangroup2
The WLAN group entry 'wlangroup2' has been loaded. To save the WLAN group, type 'end' or 'exit'.
ruckus(config-wlangrp)# name wlangroup2
ruckus(config-wlangrp)# show
WLAN Group:
ID:
2:
Name= wlangroup2
Description=
WLAN Service:
ruckus(config-wlangrp)#