mesh-radio-option

Configures the radio band used for Mesh connectivity.
Syntax
mesh-radio-option { 2.4G | 5G | 5G/6G | 6G }
Command Default

When Mesh is enabled, 5G/6G is the default Mesh radio option.

Parameters
2.4G
Use the 2.4 GHz band for Mesh connectivity.
5G
Use the 5 GHz band for Mesh connectivity.
5G/6G
Use both the 5 GHz and 6 GHz bands for Mesh connectivity.
6G
Use the 6 GHz band for Mesh connectivity.
Modes

Mesh configuration mode

Usage Guidelines

APs must support the selected radio band for the configuration to take effect.

Examples

The following example configures the AP to use the 6 GHz band for Mesh connectivity.

ruckus(config-mesh)# mesh-radio-option 6G
The command was executed successfully. To save the changes, type 'end' or 'exit'.
History
Release version Command history
200.19 This command was updated to support independent 5 GHz and 6 GHz Mesh radio options.