adj-threshold
To configure the adjacent threshold for load balancing, use the following command:
Syntax Description
Defaults
Wifi0: 50
Wifi1: 43
Example
ruckus(config-load-balancing)# enable wifi0
The command was executed successfully. To save the changes, type 'end' or 'exit'.
ruckus(config-load-balancing)# adj-threshold wifi0 25
The command was executed successfully. To save the changes, type 'end' or 'exit'.
ruckus(config-load-balancing)# show
Load Balancing:
Radio 0:
Status= Enabled
AdjacentThreshold= 25
WeakBypass= 33
StrongBypass= 55
ActivationThreshold= 10
NewTrigger= 3
Headroom= 3
Radio 1:
Status= Disabled
AdjacentThreshold= 43
WeakBypass= 35
StrongBypass= 55
ActivationThreshold= 10
NewTrigger= 3
Headroom= 3
ruckus(config-load-balancing)#