lan dot1x

To configure 802.1X settings for a LAN port, use the following command:

lan NUMBER dot1x [ disable |supplicant | auth-port-based | auth-mac-based ]

Syntax Description

lan dot1x
Configure 802.1X settings for this port
NUMBER
LAN port number to configure
disabled
Disable 802.1X
supplicant
Configure this LAN port as an 802.1X supplicant
supplicant username WORD
Set the username for AP 802.1X supplicant
supplicant password WORD
Set the password for AP 802.1X supplicant
supplicant mac
Set the username and password to use AP MAC address for AP 802.1X supplicant
auth-port-based
Configure this LAN port as an 802.1X authenticator (port-based)
auth-mac-based
Configure this LAN port as an 802.1X authenticator (MAC-based)

Defaults

Disabled

Example

ruckus(config-ap-model)# lan 1 dot1x supplicant
ruckus(config-ap-model)#