wlan-bind

Enables WLAN binding on the 2.4 GHz, 5 GHz, 6 GHz, or all the radios.
Syntax
wlan-bind { 2.4 | 5 | 6| all }
no wlan-bind { 2.4 | 5 | 6|all }
Command Default

WLAN binding is enabled on all the radios.

Parameters
2.4
Specifies the 2.4 GHz radio.
5
Specifies the 5 GHz radio.
6
Specifies the 6 GHz radio.
all
Specifies all radios.
Modes

WLAN configuration mode

Usage Guidelines

Use the show wlan all command to display information about the WLAN bind from the User EXEC mode.

The no form of the command removes the configured wlan bind values for the radio(s).

Examples

The following example enables WLAN binding on all radios.

ruckus# config
ruckus(config)# wlan testwlan33
ruckus(config-wlan)# wlan-bind all
The command was executed successfully. To save the changes, type 'end' or 'exit'.
ruckus(config-wlan)# exit
ruckus(config)# exit
ruckus# show wlan all
WLAN Service:
ID:
1:
NAME = Ruckus1
Tx. Rate of Management Frame(2.4GHz) = 2.0Mbps
Tx. Rate of Management Frame(5GHz) = 6.0Mbps
Beacon Interval = 100ms
SSID = Ruckus1
Description = Ruckus1
Type = Standard Usage
Authentication = open
Encryption = wpa2
Algorithm = aes
Passphrase = secretpassphrasegoeshere
FT Roaming = Disabled
802.11k Neighbor report = Disabled
Web Authentication = Disabled
Authentication Server = Disabled
Accounting Server = Disabled
Called-Station-Id type = wlan-bssid
Tunnel Mode = Disabled
DHCP relay = Disabled
Max. Clients = 100
Isolation per AP = Disabled
Isolation across AP = Disabled
Zero-IT Activation = Enabled
Load Balancing = Disabled
Band Balancing = Disabled
Wifi6 = Enabled
Service = Enabled
Dynamic PSK = Enabled
Dynamic PSK Passphrase Length =
Dynamic PSK Expire Time = unlimited
Dynamic PSK Validity Period =
Limit Dynamic PSK = Disabled
Auto-Proxy configuration:
Status = Disabled
Inactivity Timeout:
Status = Disabled
VLAN-ID = 1
Dynamic VLAN = Disabled
Closed System = Disabled
Https Redirection = Disabled
OFDM-Only State = Disabled
Multicast Filter State = Disabled
802.11d State = Disabled
Force DHCP State = Disabled
Force DHCP Timeout = 0
DHCP Option82:
Status = Disabled
Option82 sub-Option1 = Disabled
Option82 sub-Option2 = Disabled
Option82 sub-Option150 = Disabled
Option82 sub-Option151 = Disabled
Ignore unauthorized client statistic = Disabled
STA Info Extraction State = Enabled
BSS Minrate = Disabled
DTIM period = 1
Directed MC/BC Threshold = 5
Call Admission Control State = Disabled
PMK Cache Timeout= 720 minutes
PMK Cache for Reconnect= Enabled
NAS-ID Type= wlan-bssid
Roaming Acct-Interim-Update= Disabled
PAP Message Authenticator = Enabled
Send EAP-Failure = Disabled
L2/MAC = No ACLS
L3/L4/IP Address = No ACLS
L3/L4/IPv6 Address = No ACLS
Precedence = No ACLS
Proxy ARP = Disabled
Device Policy = No ACLS
Vlan Pool = No Pools
Role based Access Control Policy = Disabled
SmartRoam = Disabled Roam-factor = 1
Allow List = No ACLS
Application Recognition & Control = Disabled
Apply ARC Policy = NO POLICY
Wlan Bind = all
Client Flow Data Logging = Disabled
Client Connection Data = Disabled
ruckus#
History
Release version Command history
200.16 This command was modified to include the 6 GHz radio setting.