model
model WORD
[
port-setting ]
[status-leds
{
enable
|
disable
}
]
[external-antenna {
2.4Ghz
}
{(11BG) |
(11NG) }
|
{
5Ghz
}
{ (11NA) | (11A)
}{enable
|
disable
|
gain
|
2-antennas
|
3-antennas
}]
[max-clients
NUMBER
]
[ poe-out
{
enable
|
disable
}
]
[internal-heater {
enable
|disable
}
]
[
cband-channels
{
enable
|disable
}
][
cband-license {
enable
|disable
}
][
lacp-status {
enable
|disable
}
][
power-mode {auto
|
802.3af
|
802.3at
|
802.3bt5
|
802.3bt6|
802.3bt7
}
][
802.3af-txchain {
1
|
2
|
4 }
][
band-scheme {
2-5
|
2-5-6
}
]no model
WORD
[
port-setting ]
[status-leds-override
]
[external-antenna-override
]
[max-clients
]
[
poe-out-override
]
[internal-heater-override
]
[
cband-channels-override
][
cband-license-override
][
lacp-status-override
][
power-mode-override
][
802.3af-txchain-override
]
[
band-scheme-override
]The default AP model-specific setting values are:
| Parameter | Value |
|---|---|
| status-leds | Enabled |
| external-antenna | Auto |
| max-clients | 100 |
| poe-out | Disabled |
| internal-heater | Disabled |
| cband-channels | Disabled |
| cband-license | Disabled |
| lacp-status | Disabled |
| power-mode | Varies depending on AP model |
| 802.3af-txchain | Varies depending on AP model |
| band-scheme | 2-5-6 (if the country code supports 6 GHz). The default setting is dependent on the country code associated with the AP; for example, an AP in a country that does not support 6GHz defaults to 2-5 mode. This command is supported only on AP model R670. |
- port-setting
- Enters the config-apgrp-port context, allowing
entry of commands related to port setting for the specified AP model. See
port-settingfor more information. - max-clients NUMBER
- Sets the maximum clients for the AP on a per radio basis (regardless of the number of SSIDs broadcasted by the radio).
- cband-channels
- Configures the C-band (5.8 GHz) channels for the specified AP model (enable, disable). (UK country code only)
- power-mode
- Sets the PoE mode for the specified AP model. Allowed values are auto, 802.3af, 802.3at, 802.3bt5, 802.3bt6, or 802.3bt7.
- 802.3af-txchain
- Sets the 2.4GHz radio transmit chains in 802.3af PoE mode for the specified AP model. Allowed values are 1, 2, or 4.
AP group configuration mode
The band-scheme setting is
supported only on AP model R670. The band-scheme 2-5-6 setting
can be configured only if the country code supports 6 GHz.
The cband-channels setting can be configured only if the AP
country code is UK.
Enter the end or exit command to save the model-specific changes for the AP group.
The no form of the command removes the configured values for the model-specific settings, reverting to the default configuration settings.
The following example configures the model-specific settings globally for all APs in the AP group.
ruckus(config-apgrp)# model R850 port-setting The command was executed successfully. To save the changes, type 'end' or 'exit'. ruckus(config-apgrp-port)# ruckus(config-apgrp)# model R610 status-leds enable The command was executed successfully. To save the changes, type 'end' or 'exit'. ruckus(config-apgrp)# ruckus(config-apgrp)# model R710 power-mode auto The command was executed successfully. To save the changes, type 'end' or 'exit'. ruckus(config-apgrp)# ruckus(config-apgrp)# model R710 802.3af-txchain 1 The command was executed successfully. To save the changes, type 'end' or 'exit'. ruckus(config-apgrp)# ruckus(config-apgrp)# model r670 band-scheme 2-5-6 The command was executed successfully. To save the changes, type 'end' or 'exit'. ruckus(config-apgrp)#
| Release version | Command history |
|---|---|
| 200.17 | This command was modified to include the band-scheme setting. |