acl

To configure an L2 MAC/L3/L4/IP ACL with the specified name, use the following command:
Syntax
acl [l2acl | dvcpcy | prece| role-based-access-ctrl| l3acl} <WORD> ]
Parameters
l2acl
Configures a L2 ACL with the specified name.
dvcpcy
Configures a Device Policy with the specified name.
prece
Configures a Precedence Policy with the specified name.
role-based-access-ctrl
Enable Role based Access Control Policy.
l3acl
Configures a L3/L4/IP ACL with the specified name.
<WORD>
Specify the name of the ACL.
Examples
ruckus(config-wlan)# acl l2acl acl1
The command was executed successfully. To save the changes, type 'end' or 'exit'.
ruckus(config-wlan)#