show

To display L3/L4/IP ACL settings, use the following command:

show

Example

ruckus(config-l3acl)# show
L3/L4/IP ACL:
  ID:
    :
      Name= l3acl1
      Description=
      Default Action if no rule is matched= Deny all by default
      Rules:
        1:
          Description=
          Type= Allow
          Destination Address= 192.168.1.22/24
          Destination Port= 53
          Protocol= Any
        2:
          Description=
          Type= Allow
          Destination Address= Any
          Destination Port= 67
          Protocol= Any

ruckus(config-l3acl)#