lan

To enable the LAN port, use the following command:

lan NUMBER

Syntax Description

lan
Enable the LAN port
NUMBER
Specify the LAN port to enable
uplink WORD
Sets the AP port to use the specified type(trunk,access or general).
untag NUMBER
Sets the AP port to use the specified VLAN ID(1-4094) or none.
member NUMBER
Sets the AP port to use the specified members(1-4094).
opt82
Sets the AP port DHCP Option 82.
tunnel
Sets the AP port tunnel.
guest-vlan NUMBER
Sets the AP port to use the specified guest VLAN ID(1-4094).
dvlan
Sets the AP port dynamic VLAN.
dot1x
Sets the AP port 802.1X.

Defaults

Enable LAN = Yes

LAN Type= trunk

Untag ID= 1

Members= 1-4094

Guest VLAN=

Enable Dynamic VLAN= Disabled

802.1X= disabled

DHCP opt82= Disabled

Tunnel= Disabled

MLD Snooping= Disabled

IGMP Snooping= Enabled

Example

ruckus(config-ap-model)# lan 1
ruckus(config-ap-model)#