destination address

To set the destination address of the rule, use the following command:

destination address IP-ADDR/WORD

Syntax Description

destination address
Set the destination address of the rule
IP-ADDR/WORD
Set the destination to this IP address

Defaults

None.

Example

ruckus(config-l3acl-rule)# destination address 192.168.1.22 
The destination IP address is invalid. Please enter 'Any' or check the IP address(for example:192.168.0.1/24), and then please try again.
ruckus(config-l3acl-rule)# destination address 192.168.1.22/24 
The command was executed successfully. To save the changes, type 'end' or 'exit'.