ap-management-vlan

To enable the AP management VLAN and set to either “keep AP’s setting” or to the specified VLAN ID, use the following command:

ap-management-vlan[keeping]NUMBER

Syntax Description

ap-management-vlan
Enable and configure the global AP management VLAN
keeping
Sets management VLAN to “Keep AP’s setting”
NUMBER
Set management VLAN to the number specified

Defaults

Keep AP's setting

Example

ruckus(config-ap-policy)# ap-management-vlan keeping
The command was executed successfully.
ruckus(config-ap-policy)#
Note: ap-management-vlan command is supported only in Dedicated Master mode.