radio (AP)

Configures the 2.4, 5, and 6 GHz radio settings independently on an AP.
Syntax
radio { 2.4 | 5 | low_5 | upper_5 | 6 } [ channelization { auto | number }] [channel { auto | number } ] [tx-power { auto | full | min | 1-10 }] [wlan-group group_name ] [ wlan-service { enable |disable } ] [admission-control value ] [ channel range number-list ] [ bss-min-rate number ] [ mgmt-tx-rate number ] [ afc-enabled word ]
no radio { 2.4 | 5 | 6 }[ channelization { auto | number }] [channel { auto | number } ] [tx-power { auto | full | min | 1-10 }] [wlan-group group_name ] [ wlan-service { enable |disable } ] [admission-control value ] [ channel range number-list ] [ bss-min-rate number ] [ mgmt-tx-rate number ]
Command Default

The default radio setting values are:

Parameter Value
channelization Auto
channel Auto
tx-power Auto
wlan-group Default
wlan-service Enabled
wlan-service-override Disabled
tx-power Auto
admission-control Disabled
bss-min-rate 0 (HE MCS 0)
mgmt-tx-rate 6 Mbps
afc-enabled Disabled by default for indoor APs. Automatically enforced on outdoor APs and cannot be disabled.
Parameters
2.4
Configures the 2.4 GHz radio.
5
Configures the 5 GHz radio.
6
Configures the 6 GHz radio. This option is supported only in tri-band APs.
channelization { auto | number }
AP channel width. For the 2.4 GHz radio, valid values are auto, 20, or 40 MHz. For the 5 GHz radio, valid values are auto, 20, 40, and 80 MHz. For the 6 GHz radio, valid values are auto, 20, 40, 80, 160, and 320 MHz.
channel { auto | number }
AP channel. Valid values are auto or a specific channel number. From 1 through 233 for 20 MHz, or from 1 through 229 for 40 MHz, or from 1 through 221 for 80, 160, or 320 MHz channels.
tx-power { auto | full | min | num 1-10 }
AP transmit power. Valid values are auto, full, min, or a specific dB value in the range of -1 through -10.
admission-control value
Call admission control airtime usage limit (as a precentage).
channel range number-list
Channels allowed (in 2.4 GHz and 6 GHz radios)
wlan-group group_name
WLAN group name.
wlan-service { enable | disable }
Enable WLAN service on this radio.
bss-min-rate number
Minimum Basic Service Set (BSS) rate on 6 GHz radio. Valid values are 0 (HE MCS 0), 1 (HE MCS 1), 2 (HE MCS 2), and 3 (HE MCS 3).
mgmt-tx-rate number
Management transmission rate on 6 GHz radio. Valid values are 6, 9, 12, 18, 24, 36, 48, and 54 Mbps.
afc-enabled word
Enable or disable AFC on 6 GHz radio.
Modes

AP configuration mode

Usage Guidelines

The 6 GHz radio can be configured only on the tri-band APs.

The no form of the command removes the configured values for the radios, reverting to the default configuration settings.

Examples

The following example configures the 2.4 GHz radio settings globally for all APs.

ruckus(config-ap)# radio 2.4 channelization auto
The command was executed successfully. To save the changes, type 'end' or 'exit'.
ruckus(config-ap)# radio 2.4 channel auto
The command was executed successfully. To save the changes, type 'end' or 'exit'.
ruckus(config-ap)# radio 2.4 wlan-group Default
The command was executed successfully. To save the changes, type 'end' or 'exit'.
ruckus(config-ap)# radio 2.4 wlan-service
The command was executed successfully. To save the changes, type 'end' or 'exit'.
ruckus(config-ap)# radio 2.4 tx-power auto
The command was executed successfully. To save the changes, type 'end' or 'exit'.
ruckus(config-ap)# end
The device information has been updated.
Your changes have been saved.
ruckus(config)#
History
Release version Command history
200.18 The bss-min-rate, mgmt-tx-rate, and afc-enabled parameters were added for 6 GHz radio setting.
200.16 This command was modified to include the 6 GHz radio setting.