open
To set the authentication method to 'open', use the following command:
open
[none|owe|wpa2|wpa3|wpa23-mixed|wpa-mixed|wep-64|wep-128] passphrase
<WORD> algorithm <WORD>]
200.15
update
open [none|owe|wpa2|wpa3|wpa23-mixed|wpa-mixed]
passphrase <WORD> algorithm <WORD>]
Syntax Description
- none: Sets the authentication method to 'open' and encryption method to 'none'.
- owe: Sets the authentication method to 'open', encryption method to 'OWE', algorithm to 'AES', and pmf to 'required'.
- wpa2: Sets the authentication method to 'open' and encryption method to 'WPA2'.
- wpa3: Sets the authentication method to 'open' and encryption method to 'WPA3'.
- wpa23-mixed: Sets the encryption method to 'WPA2/WPA3 Mixed'.
- wpa-mixed: Sets the encryption method to 'WPA/WPA2 Mixed'.
- AES: Sets the algorithm to AES.
- auto: Sets the algorithm to auto.
- key: Sets the WEP-64 or WEP-128 key.
Defaults
None.
Example
ruckus(config)# wlan wlan2 The WLAN service 'wlan2' has been created. To save the WLAN service, type 'end' or 'exit'. ruckus(config-wlan)# open none The command was executed successfully. To save the changes, type 'end' or 'exit'. ruckus(config-wlan)# end The WLAN service 'wlan2' has been updated and saved. Your changes have been saved. ruckus(config)#