mesh mode Use the mesh mode command from within the config-apgrp context to configure the group's mesh mode settings. mesh mode [ auto | root-ap | mesh-ap | disable ] Syntax Description mesh mode Configure the AP’s mesh mode auto Set mesh mode to Auto root-ap Configure AP as a Root AP mesh-ap Configure AP as a Mesh AP disable Disable mesh Defaults Auto. Example ruckus(config-apgrp)# mesh mode auto The command was executed successfully. To save the changes, type 'end' or 'exit'. ruckus(config-apgrp)# In this section: no meshmode-override maxhops Parent topic: Configure AP Group Commands