radio (AP Group)

Configures the 2.4, 5, and 6 GHz radio settings independently on an AP Group.
Syntax
radio { 2.4 | 5 | 6 } [ channelization { auto ] [auto-channel-selection { four-channel | three-channel }| number } ] [channel { auto | number } ] [tx-power { auto | full | min | 1-10 } ] [wlan-group group_name ] [ wlan-service { enable | disable } [admission-control value ] [ channel-range number-list ] [ bss-min-rate number ] [ mgmt-tx-rate number ] [ afc-enabled word ]
no radio { 2.4 | 5 | 6 } [ channelization-override ] [channel-override ] [tx-power-override ] [ channel-range-override]
Command Default

The default radio setting values are:

Parameter Value
channelization Auto
channel Auto
auto-channel-selection Three-channel
tx-power Auto
wlan-group Default
wlan-service Enabled
wlan-service-override Disabled
tx-power Auto
admission-control Disabled
bss-min-rate 0 (HE MCS 0)
mgmt-tx-rate 6 Mbps
afc-enabled Disabled by default for indoor APs. Automatically enforced on outdoor APs and cannot be disabled.
Parameters
2.4
Configures the 2.4 GHz radio.
5
Configures the 5 GHz radio.
6
Configures the 6 GHz radio. This option is supported only in tri-band APs.
channelization { auto | number }
AP channel width. For the 2.4 GHz radio, valid values are auto, 20, or 40 MHz. For the 5 GHz radio, valid values are auto, 20, 40, and 80, 160 MHz. For the 6 GHz radio, valid values are auto, 20, 40, 80, 160, and 320 MHz.
channel { auto | number }
AP channel. Valid values are auto or a specific channel number. Valid values are from 1 through 233 for 20 MHz, or from 1 through 229 for 40 MHz, or from 1 through 221 for 80, 160, or 320 MHz channels.
auto-channel-selection { four-channel | three-channel }
AP auto channel selection. Valid values for the four-channel are 1, 5, 9, and 13, and for three-channel are 1, 6, and 11.
tx-power { auto | full | min | num 1-10 }
AP transmit power. Valid values are auto, full, min, or a specific dB value in the range of -1 through -10.
admission-control value
Call admission control airtime usage limit (as a precentage). Valid values are 10%, 20%, 30%, 40%, 50%, 60%, and 70%.
channel-range number-list
Channels allowed (in 2.4 GHz and 6 GHz radios).
wlan-group group_name
WLAN group name.
wlan-service { enable | disable }
Enable WLAN service on this radio.
bss-min-rate number
Minimum Basic Service Set (BSS) rate on 6 GHz radio. Valid values are 0 (HE MCS 0), 1 (HE MCS 1), 2 (HE MCS 2), and 3 (HE MCS 3).
mgmt-tx-rate number
Transmission rate for management frames on 6 GHz radio. Valid values are 6, 9, 12, 18, 24, 36, 48, and 54 Mbps.
afc-enabled word
Enable or disable AFC on 6 GHz radio.
wlan-service-override
Enable the override of the WLAN service settings for this radio.
no channelization-override
Disables the override of the channelization settings.
no channel-override
Disables the override of the channels.
no tx-power-override
Disables the override of the radio transmit power.
no channel-range-override
Disables the override of the channel range on 6 GHz radio.
Modes

AP Group configuration mode

Usage Guidelines

The 6 GHz radio can be configured only on the tri-band APs.

The no form of the command removes the configured values for the radios, reverting to the default configuration settings.

Examples

The following example configures the 2.4 GHz radio settings on an AP Group.

ruckus# config
ruckus(config)# ap-group "System Default"
The AP group entry 'System Default' has been loaded. To save the AP group, type 'end' or 'exit'.
ruckus(config-apgrp)# radio 5 channel auto channelization auto wlan-group Default tx-power Num 1
The command was executed successfully. To save the changes, type 'end' or 'exit'.
ruckus(config-apgrp)# 
ruckus(config-apgrp)# show
APGROUP:
ID:
1:
Name= System Default
Description= System default group for Access Points
Radio 11bgn:
Channelization= Auto
Channel= Auto
Enable auto channel selection which select from 1,6,11= Yes
Tx. Power= -1dB
WLAN Group= Default
Radio 11an:
Channelization= Auto
Channel= Auto
Tx. Power= Auto
WLAN Group= Default
Members:
MAC= 04:4f:aa:0c:b1:00
MAC= 00:24:82:3f:14:60
MAC= 74:91:1a:2b:ff:a0
MAC= 00:1f:41:2a:2b:10
ruckus(config-apgrp)# end
The AP group 'System Default' has been updated.
Your changes have been saved.
ruckus(config)#
History
Release version Command history
200.18 The bss-min-rate and mgmt-tx-rate parameters were introduced for 6 GHz radio setting.
200.16 This command was modified to include the 6 GHz radio setting.