transition-disable

Enables the Transition Disable setting on a WPA3 WLAN.
Syntax
transition-disable
no transition-disable
Command Default

By default, transition-disable is disabled.

Parameters
Modes

WLAN configuration mode

Usage Guidelines

The Transition Disable setting is valid only on WPA3 WLANs.

The no form of the command disables the setting.

Examples

The following example enables the Transition Disable setting on a WLAN.

ruckus# config
ruckus(config)# wlan testwlan32
ruckus(config-wlan)# transition-disable
The command was executed successfully. To save the changes, type 'end' or 'exit'.
Transition Disable = Enabled
ruckus(config-wlan)#

The following example disables the Transition Disable setting on a WLAN.

ruckus# config
ruckus(config)# wlan testwlan30
ruckus(config-wlan)# no transition-disable
The command was executed successfully. To save the changes, type 'end' or 'exit'.
Transition Disable = Disabled
ruckus(config-wlan)#
History
Release version Command history
200.16 This command was introduced.