lldp

To enable, disable or configure the AP’s Link Layer Discover Protocol settings, use the following lldp commands from within the config-ap context.

Syntax Description

lldp
Configure LLDP settings.
enable
Enable LLDP with current settings.
disable
Disable LLDP with current settings.
interval NUMBER
Set packet transmit interval in second(s).
holdtime NUMBER
Set amount of time receiving device should retain the information.
ifname eth NUMBER
Enter the AP port number.
mgmt enable
Enable LLDP management IP address of the AP.
mgmt disable
Disable LLDP management IP address of the AP.

Example

ruckus(config-ap)# lldp enable
ruckus(config-ap)#