user-group

Creates and updates user group configuration.
Syntax
user-groupname
no user-groupname

After the user-group command is entered to enter user group configuration mode, the following configuration syntax is available:

{domaindomain-name|namename|permissionpermission-type|resourceresource[full-access|modify|read]|useruser-name}
Command Default

No user groups are configured.

Parameters
name
Specifies the name of the user group.
domain
Specifies the domain for the user group. This command is supported on the SmartZone 300 controller only.
namename
Specifies the name of the user group.
permissionpermission-type
Specifies the permission type for the user group. Some permission types are preset such as "AP Admin," "Guest Pass Admin," "Network Admin," and "Super Admin." These options must be entered as shown including the parentheses.
resourceresource
Specifies the resource type for the user group. This command is supported on the SmartZone 300 controller only.
full-access
Allows the resource full access to the device.
modify
Allows the resource to make changes to the device.
read
Allows the resource read access only to the device.
useruser-type
Specifies the user. Some user types are preset such as ap-admin, ap_guest, guest, mvno, and super. These options must be entered as shown. Additional syntax options are available after entering the user type of mvno. See the syntax section for more details.
Modes

Global configuration mode

Usage Guidelines

The no form of the command removes the specified user group.

Examples

The following example configures user group group1 and gives the user group permission to be an AP administrator 

device# config
device(config)# user-group group1
device(config-user-group)# description user group from marketing
device(config-user-group)# permission "AP Admin"
Parent topic: Commands Si - Z