data-plane

Updates data plane configurations.
Syntax
data-plane name forward-stp
no data-plane name forward-stp
Command Default

Data plane configurations are not updated.

Parameters
name
Specifies a data plane.
forward-stp
Enables the STP package bridge.
Modes

Global configuration mode

Usage Guidelines

The no form of the command removes a data plane and disables the STP package bridge. This command is supported on the SmartZone 300 and vSZ-H controllers only.

Examples

The following example configures the data plane settings and enables the STP package bridge.

device# configure
device(config)# data-plane
device(config)# data-plane KKK-SZ300-D0 forward-stp

Successful operation
Parent topic: Commands D through F