Creates or updates the virtual SmartZone dataplane (vSZ-D) zone affinity profile
configuration.
Syntax
After the enable command is
entered to allow the outbound traffic, the following configuration syntax is
available:
{
allow-sess-on-acct-fail
|
auth
token
|
cache-cleanup
|
ecgi-in-gtpv2-msg
|
error
|
error-message
|
expiration-interval
|
fast-reauth
|
gtp-nsapi
|
gtpv2-interface-type
|
host
ip-address
|
imei-ie-in-gtp-msg
|
ip
ip-address
|
ip-rule
|
local-host-name
|
local-network-indicator
|
local-realm-name
|
mcc
country-code
|
mnc
country-code
|
name
SCI-profile-name
|
nat-ip-translation
|
ndc
|
password
password
|
pasv-port
|
pattern
pattern
|
peer-timeout
seconds
|
policy
|
port
port
|
read
|
retry-timeout
|
scg-rai-in-gtpv2-msg
|
scg-sai-in-gtpv2-msg
|
secret
eap-sim-key
|
shared-secret
secret-key
|
system-idsystem-id
|
tai-in-gtpv2-msg
|
test
|
type
type
|
unit
threshold
|
user
user
|
user-id-privacy
user-id-priv
|
value
threshold-value
|
watch-dog-timeout
seconds
|
write
}
Command Default
No dp-group configuration is created or updated.
Parameters
- profile-name
- dp-group profile name.
- allow-sess-on-acct-fail
- Allows session on accounting fail.
- auth
- Sets SNMPv3 user authentication.
- cache-cleanup
- Enables cache cleanup setting.
- ecgi-in-gtpv2-msg
- Includes ECGI in GTPv2 messages.
- error
number
- Sets the error code. Number from 2 to 5.
- error-message
errmsg
- Sets the error message text.
- expiration-interval
interval
- Sets the expiration interval using one of the following keywords:
day,
hour,
month,
never,
week,
year.
- fast-reauth
- Enables fast reauthentication support.
- gtp-nsapi
number
- Sets the GTP Network Service Access Point Identifier (NSAPI).
- gtpv2-interface-type
number
- Sets the GTPv2 interface type.
- host
ip-address
- Sets the IP address of the host.
- imei-ie-in-gtp-msg
- Includes the IMEI IE in GTP messages.
- ip
ip-address
- Sets the IP address of the primary RADIUS server.
- local-host-name
- Updates the local host name.
- local-network-indicator
- Setas the local network indicator.
- local-realm-name
- Updates the local realm name.
- mcc
country-code
- Sets the mobile country code. Three-digit number.
- mnc
network-code
- Sets the mobile network code. Three-digit number.
- name
sci-prof-name
- Sets the SCI profile name.
- nat-ip-translation
- Enables network address translation (NAT) in FTP passive mode.
- ndc
ndc-code
- Sets the network destination code.
- password
password
- Sets the password.
- pasv-port
password
- Sets the dynamic data transmission port range.
- pattern
pattern
- Sets the user agent pattern.
- peer-timeout
seconds
- Updates the peer expiry time, in seconds.
- policy
seconds
- Sets the ALC policy.
- read
- Enables read privilege.
- retry-timeout
seconds
- Updates the connection retry time, in seconds.
- scg-rai-in-gtpv2-msg
- Includes SCG-RAI in GTPv2 messages.
- scg-sai-in-gtpv2-msg
- Includes SCG-SAI in GTPv2 messages.
- secret
EAP-SIM-key
- Sets the EAP-SIM secret key.
- shared-secret
secret-key
- Sets the shared secret key of the primary RADIUS server.
- system-id
system-id
- Sets the system ID.
- tai-in-gtpv2-msg
- Includes TAI in GTPv2 messages.
- test
- Tests the RADIUS server.
- type
auth-type
- Sets the administration authentication type.
- unit
threshold-unit
- Sets the threshold unit.
- user
userid
- Sets the user ID.
- user-id-privacy
- Enables user ID privacy support.
- value
threshold-value
- Sets the threshold value.
- watch-dog-timeout
seconds
- Updates the device watch dog time, in seconds.
- write
- Enables write privilege.
Modes
Global configuration mode
Usage Guidelines
The
no form of the command deletes the specified zone affinity profile.
The following table lists the related dp-group configuration
commands.
Examples
The following example configures a cache cleanup
for the vSZ-H zone named VSD.
device(config)# dp-group VSD
device(config-dp-group)# cache-cleanup