apcli

Enters debug AP CLI configuration mode to run the AP CLI debug script management.
Syntax
apcli

After the apcli command is entered to enable the debug AP CLI configuration mode, the following configuration syntax is available:

[ execute | show { diagnostic-script script-name | schedule } ]
show-execution-status
upload ftp-url
Parameters
execute
Executes the AP CLI script.
show
Shows script summaries.
diagnostic-script script-name
Shows the diagnostic script.
schedule
Shows the scheddule script.
show-execution-status
Shows the script execution summary.
upload
Uploads an AP CLI script from a remote FTP server
ftp-url
Specifies the FTP URL.
Modes

Debug configuration mode

Usage Guidelines

This command is supported on the SmartZone 100 and vSZ-E controllers only.

Examples

The following example enters debug AP CLI configuration mode where AP CLI debug script management can be run. 

device# debug
device(debug)# apcli
device(debug-apcli)#
Parent topic: Commands A through C