device(config-domain-zone)# aaa
|
name
|
Creates or updates
the AAA server configuration.
|
device(config-domain-zone)# adj-threshold
|
2.4g${value} 5g${value} Value is minimum =
1 and maximum = 100
|
Sets the adjacent
radio threshold of the client load balancing.
|
device(config-domain-zone)# ap-firmware
|
ap-firmware
|
Sets the AP
firmware.
|
device(config-domain-zone)# ap-group
|
name
|
Creates or updates
the AP group configuration.
|
device(config-domain-zone)# ap-ip-mode
|
[ipv4|ipv6|dual]
|
Sets the AP IP
mode to either IPv4 or IPv6.
|
device(config-domain-zone)# ap-logon
|
logon-id
|
Sets the login ID
for the AP administrator.
|
device(config-domain-zone)# ap-mgmt-vlan
|
lvlanTag: VLAN Tag (1-4094); enter
‘keep’to keep APs setting.
|
Sets the AP
management VLAN.
|
device(config-domain-zone)# ap-model
|
name
|
Sets the AP model
configuration.
|
device(config-domain-zone)# ap-password
|
|
Sets the password
for the AP administrator.
|
device(config-zone)# ap-ping-latency-interval
|
enable disable
|
Sets the AP
latency detection by enabling or disabling the AP ping.
|
device(config-domain-zone)# ap-reboot-timeout
|
default-gateway[
hours and
minutes ]
: Sets the default gateway timeout in hours
and minutes. control-interfacehours : Sets the control interface
timeout in hours.
|
Sets the AP reboot
timeout.
|
device(config-domain-zone)# ap-registration-rule
|
priority
|
Creates or updates
the AP registration rule configuration.
|
| device(config-domain-zone)# ap-snmp-options |
|
Sets the AP SNMP options. |
device(config-domain-zone)# background-scan
|
2.4gseconds 5gseconds
|
Sets the
background scanning.
|
device(config-domain-zone)# band-balancing
|
2.4gint2.4g 2.4G band int: Percentage of clients on 2.4G band
|
Sets the band
balance.
|
| device(config-domain-zone)# block-client |
mac: Client MAC Address |
Sets to block clients. |
device(config-domain-zone)# bonjour-gateway
|
|
Enables the
bonjour gateway.
|
device(config-domain-zone)# bonjour-policy
|
name
|
Creates or updates
the bonjour policy.
|
device(config-domain-zone)# channel
|
2.4gchannel 5g indoor channel 5g outdoor channel
|
Sets the channel.
|
device(config-domain-zone)#
channel-evaluation-interval
|
seconds: The interval value
(Range:60~3600 sec)
|
Sets the channel
evaluation interval.
|
device(config-domain-zone)# channel-range
|
2.4g[channel |all] 5g indoor[channel |all] 5g outdoor[channel |all]
|
Sets the channel
range.
|
device(config-domain-zone)# channel-select-mode
|
2.4g${value} 5g${value}
|
Set a mode to
automatically adjust AP channels.
|
device(config-domain-zone)# channelfly-mtbc
|
2.4gnumber: MTBC value (Range: 100~1440) 5gnumber
|
Sets the MTBC
value of ChannelFly.
|
device(config-domain-zone)# channelization
|
2.4g[20|40] 5g[40|20]
|
Sets the
channelization.
|
device(config-domain-zone)#
client-admission-control
|
2.4g 5g 2.4gminClientCountminClientCount 2.4gmaxRadioLoadmaxRadioLoad 2.4gminClientThroughputminClientThroughput5gminClientCountminClientCount 5gmaxRadioLoadmaxRadioLoad 5gminClientThroughputminClientThroughput
|
Enables the client
admission control.
|
device(config-domain-zone)#
client-isolation-whitelist
|
name: Client isolation whitelist name |
Creates or updates the client isolation
whitelist. |
device(config-domain-zone)# country-code
|
country-code
|
Sets the country
code.
|
device(config-domain-zone)# description
|
text
|
Sets the
description,
|
device(config-domain-zone)# device-policy
|
name
|
Sets the device
policy.
|
device(config-domain-zone)# dfs-channel
|
|
Enable DFS
channels for the US country code.
|
device(config-domain-zone)# diffserv
|
name
|
Creates or updates
the diff server profile.
|
device(config-domain-zone)# dos-protection
|
dosBarringPeriod : DoS protection period dosBarringThreshold : DoS protection
threshold dosBarringCheckPeriod : DoS protection
checkperiod
|
Enables DoS (Denial-of-service)
protection. |
device(config-domain-zone)# ethernet-port-profile
|
name:Ethernet Port Profile name.
|
Sets the Ethernet
Port profile.
|
device(config-domain-zone)# gps
|
latitudelongitude
|
Displays the help.
|
device(config-domain-zone)# gps-altitude
|
altitude[floor|meters] altitude value floor meters
|
Sets the GPS altitude. |
device(config-domain-zone)# guest-access
|
name
|
Sets the guest
access.
|
device(config-domain-zone)# headroom
|
2.4gclient 5g: 5 GHz radio
|
Sets the headroom
(# of clients) of client load balancing.
|
device(config-domain-zone)# hotspot
|
name
|
Creates or updates
the WISPr hotspot configuration.
|
device(config-domain-zone)#
hotspot20-venue-profile
|
name
|
Creates or updates
the venue profile for hotspot release 2 configuration.
|
device(config-domain-zone)# hotspot20-wlan-profile
|
name
|
Creates or updates
the WLAN profile for hotspot release 2 configuration.
|
device(config-domain-zone)# indoor-channel
|
|
Enables the indoor
channels.
|
device(config-domain-zone)# ipsec-profile
|
profile-name
|
Sets the IPsec
profile.
|
device(config-domain-zone)# ipsec-tunnel-profile
|
${value}
|
Sets the IPsec
Tunnel Profile.
|
device(config-domain-zone)# l2-acl
|
name
|
Sets the layer 2
access control list.
|
device(config-domain-zone)# lbs
|
|
Enables the
location based service.
|
device(config-domain-zone)# lbs-service
|
|
Sets the location
based service.
|
device(config-domain-zone)# load-balancing
|
2.4g 5g
|
Sets the client
load balancing.
|
device(config-domain-zone)# location
|
text
|
Sets the location.
|
device(config-domain-zone)#
location-additional-info
|
text
|
Sets the
additional information location.
|
device(config-domain-zone)# mesh
|
|
Enables mesh
networking.
|
device(config-domain-zone)# mesh-name
|
name
|
Sets the mesh name
(ESSID).
|
device(config-domain-zone)# mesh-passphrase
|
mesh-passphrase
|
Sets the mesh
passphrase.
|
device(config-domain-zone)# move
|
domainname
|
Moves the zone to
another domain.
|
device(config-domain-zone)# node-affinity-profile
|
profile-name
|
Sets the node
affinity profile
|
device(config-domain-zone)# protection-mode
|
2.4g
${value}
|
Overrides the
protection mode on 2.4 GHz radio
|
device(config-domain-zone)# recovery-ssid-enabled
|
disable
|
Overrides the
enable recovery SSID broad case.
|
device(config-domain-zone)# rks-gre-profile
|
profile-name
|
Sets the AP Ruckus
GRE tunnel profile.
|
device(config-domain-zone)# roam
|
2.4g 5g
|
Sets the smart
roam.
|
|
device(config-domain-zone)# roam-macfilt-time
|
2.4g
seconds (0-600)
5g seconds
(0-600)
|
Sets the smart
roam MAC filter time in seconds. The default value is 15
seconds. This configuration is only available at the Zone level.
|
device(config-domain-zone)# rogue-ap-detection
|
[disable|enable ]
: Disables or enables rogue access points report-all[disable|enable
]: Enables or disables all rogue devices report-only-malicious[ enable|disable
]: Enables or disables only malicious
rogue device types report-ssid-spoofing [ disable|enable]: Enables or disables malicious rogue devices which have
SSID spoofing
|
Sets the report
rogue access point.
|
device(config-domain-zone)# secondary-channel
|
5g indoor [Secondary
channel] 5g outdoor[Secondary
channel]
|
Sets the secondary channel. |
device(config-domain-zone)# smart-mon
|
intervalvalue thresholdvalue
|
Sets the smart
monitor interval.
|
device(config-domain-zone)#
smart-roam-disconnect-event
|
|
Enables smart roam
disconnect event.
|
device(config-zone)# soft-gre-profiles
|
<profile-name> <profile-name>
<profile-name> - Select the first, second and
third SoftGRE tunnel profile <profile-name> <profile-name> - Select
the first and second SoftGRE tunnel profile <profile-name> - Select the first SoftGRE
tunnel profile
|
Sets AP SoftGRE
tunnel profiles
|
device(config-domain-zone)# syslog-enabled
|
|
Enables the
external syslog server for APs for the specified zone.
|
device(config-domain-zone)# syslog-facility
|
[Local6|Keep Original |Local0|Local5|Local7|Local1|Local4|Local3|Local2]
|
Sets the syslog
server facility,
|
device(config-domain-zone)# syslog-ip
|
ip
|
Sets the IP
address for the syslog server.
|
device(config-domain-zone)# syslog-ip6
|
ipv6
|
Sets the IPv6
address for the syslog server.
|
device(config-domain-zone)# syslog-port
|
port
|
Sets the port
number for the syslog server.
|
device(config-domain-zone)# syslog-priority
|
[Alert|Info|Critical|Warning|Notice|Emergency|All|Error]
|
Sets the syslog
server priority.
|
device(config-domain-zone)# timezone
|
System : Follows the
controller time zone setting System[time
zone] Select the time
zone from system database User-defined[time
zone abbr.] User defined time
zone Time zone
abbreviation (example: GMT, CST, EST)
|
Sets the timezone
for zone.
|
device(config-domain-zone)# timezone-dst
|
[ Start |End ] orderweekdaymonthhour
|
Sets the user
defined timezone for daylight savings.
|
device(config-domain-zone)# timezone-gmt-offset
|
[ hour |
hour:] minute: For example, 8, -7:45
|
Sets the user
defined timezone for GMT offset.
|
device(config-domain-zone)# tunnel-profile
|
profile-name
|
Sets the AP GRE
tunnel profile.
|
device(config-domain-zone)# tunnel-type
|
[gre|gre-udp]
|
Sets the tunnel
type.
|
device(config-domain-zone)# tx-power
|
2.4g${value} 5g${value} Value is minimum =
1 and maximum = 100
|
Sets the TX power
adjustment.
|
device(config-domain-zone)# usb-software
|
uploadftp-url
|
Sets the AP USB
software package.
|
device(config-domain-zone)# venue-code
|
codeVenue Code
|
Sets the venue code. |
device(config-domain-zone)# venue-profile
|
name
|
Sets the venue
profile.
|
device(config-domain-zone)# vlan-overlapping
|
|
Enables the
overlapping of VLAN pooling.
|
device(config-domain-zone)# vlan-pooling
|
name
|
Creates or updates
the VLAN pooling profile.
|
device(config-domain-zone)# weak-bypass
|
2.4g${value} 5g${value} Value is minimum =
1 and maximum = 100
|
Sets the weak
bypass threshold of the client load balancing.
|
device(config-domain-zone)# web-authentication
|
name
|
Sets the web
authentication.
|
device(config-domain-zone)# wechat
|
name: WeChat name
|
Create/update
WeChat configuration.
|
device(config-domain-zone)# wlan
|
name
|
Creates or updates
the WLAN/ ESSID configuration.
|
device(config-domain-zone)# wlan-group
|
name
|
Creates or updates
the WLAN group configuration.
|
device(config-domain-zone)# wlan-scheduler
|
name
|
Creates or updates
the WLAN scheduler configuration.
|