show ap

Displays details about a specific access point (AP) identified by its MAC address.
Syntax
show apmac-address[mesh{neighbors|topology]
Parameters
mac-address
MAC address of the AP.
mesh
Displays AP mesh statistics.
neighbors
Displays the AP mesh neighbors.
topology
Displays the AP mesh topology.
Modes

Privileged EXEC mode

Usage Guidelines

This command is supported on all SmartZone platforms except SmartZone Data Plane controller.

Examples

The following example displays the mesh topology for the AP with the MAC address of 84:18:3A:39:C8:50 

device# show ap DC:AE:EB:22:3E:D0

   General Information
   ----------------------------------------------------------------
   AP MAC Address          : DC:AE:EB:22:3E:D0
   AP Name                 : dhcp-10-206-84-82
   Description             :
   Serial Number           : 272002000225
   Location                :
   GPS Coordinates         :
   Firmware Version        : 6.0.0.0.1582
   IP Address              : 10.206.84.82
   IP Type                 : IPV4
   IPv6 Address            :
   IPv6 Type               : autoconf
   External IP Address     : 10.206.84.82
   Model                   : R550
   Mesh Role (Hops)        : Disabled
   Power Source            : DC
   Management VLAN         : 1
 
   Status Summary
   ----------------------------------------------------------------
   Connection Status       : Connect
   Uptime                  : 3h 58m
...
Parent topic: Show Commands