show interface

Displays the interface runtime status or configuration information.
Syntax

SZ300 syntax:

show interface[cluster|control|management|user-defined]

SZ100 syntax:

show interface[ap-tunnel-data|mgmt-and-ap-control|user-defined]

vSZ-D syntax:

show interface[access-core-sep-config|current-access-core-separate|current-data|current-management|data-config|management-config]
Parameters
cluster
Displays cluster interface information.
control
Displays control interface information.
management
Displays management interface information.
user-defined
Displays user-defined interface information.
ap-tunnel-data
Displays AP tunnel interface information.
mgmt-and-ap-control
Displays managementand AP control interface information.
access-core-sep-config
Displays access core separate interface configuration.
current-access-core-separate
Displays access core separate interface runtime information.
current-data
Displays access core separate interface configuration.
current-management
Displays management interface runtime information.
data-config
Displays data interface configuration.
management-config
Displays management interface configuration.
Modes

Privileged EXEC mode

Usage Guidelines

Run the show interface command without any keywords to view information about all types of interfaces configured on the controller.

This command is supported on all the controllers including the SmartZone Data Plane.

Examples

The following example shows output from the show interface cluster command on a SZ300 controller. 

device# show interface cluster
   
   Interface    : Cluster
   IP Mode      : Static
   IP Address   : 10.1.96.128
   Subnet Mask  : 255.255.255.0
   Gateway      : 10.1.96.1

The following example shows output from the show interface control command on a SZ300 controller. 

device# show interface control
   
   Interface    : Control
   IP Mode      : Static
   IP Address   : 10.1.13.128
   Subnet Mask  : 255.255.255.0
   Gateway      : 10.1.13.1

   IPv6 Mode    : Static
   IPv6 Address : 2005::128/64
   IPv6 Gateway : 2005::1

The following example shows output from the show interface ap-tunnel command on a SZ100 controller. 

device# show interface ap-tunnel
   
   Interface    : AP Tunnel Data
   IP Mode      : Static
   IP Address   : 182.168.20.161
   Subnet Mask  : 255.255.255.0
   Gateway      : 182.168.20.1

   IPv6 Mode    : Auto
   IPv6 Address : 2078::fae7:1eff:fe20:cb0/64
   IPv6 Gateway : fe80::82e0:1dff:fe76:cbd6

The following example shows output from the show interface management-config command on a vSZ-D controller. 

device# show interface management-config
   
Configure Management interface:
  proto: static
  proto6: auto
  address:10.206.67.243
  netmask:255.255.255.0
  gateway:10.206.67.254
Parent topic: Show Commands