dhcp

Creates or sets the Dynamic Host Configuration (DHCP) server configuration settings.

Syntax

dhcp [ pool-name ]

After the dhcppool-name command is entered to enable DHCP configuration mode, the following configuration syntax is available:

[ dhcp-log-syslog level value value |show [ stats | summary ] ]

Command Default

A DHCP sever pool is not configured.

Parameters

pool-name: Specifies a DHCP file.
dhcp-log-syslog level level: Specifies that DHCP events are sent to the Syslog server. Valid values range from 1 through 7.
show stats: Displays DHCP statistical information.
show summary: Displays summarized DHCP information.

Modes

Global configuration mode

Usage Guidelines

This command is supported on the SmartZone Data Plane controllers only.

Examples

The following example enters DHCP configuration mode.

device# config
device(config)# dhcp
device(config-dhcp)#

The following example specifies that DHCP events are sent to the Syslog server and specifies a value of 7.

device# config
device(config)# dhcp
device(config-dhcp)# dhcp-log-syslog value 7

The following example configures a DHCP server pool.

device> config
device(config)# dhcp mypool
device(config-dhcp-pool mypool)#