Commands A through C

In this section:

  1. acct-profile
    Enables accounting service profile configurations.
  2. admin
    Creates or update the profile for an administrator.
  3. admin (DP)
    Creates or update the profile for an administrator.
  4. admin-radius
    Configures the RADIUS server and enters Admin Radius configuration mode.
  5. adv-forwarding-profile
    Enters Advanced (mixed mode) Profile configuration mode to create or update advanced (mixed mode) profile configurations.
  6. ad-service
    Enters Active Directory Service configuration mode to enable active directory services configurations.
  7. allow-ap-certificate-replacement
    Enables AP certificate replacement configuration.
  8. ap
    Creates or updates access point (AP) configurations.
  9. ap-auto-approve
    Enables auto approve for access points (APs).
  10. ap-auto-tagging
    Sets up critical access point (AP) auto tagging rules and enters AP auto tagging configuration mode.
  11. ap-cert-check
    Enable the access point (AP) certificate check.
  12. ap-cert-expired-check
    Enables the expired certificate checking for access points (APs).
  13. ap-certificate-reset
    Resets access point (AP) certificate requests.
  14. ap-cli
    Enters debug AP CLI configuration mode for AP CLI debug script management.
  15. apcli
    Enters debug AP CLI configuration mode to run the AP CLI debug script management.
  16. ap-control-mgmt-tos
    Enables the access point (AP) control management traffic type of service (TOS).
  17. ap-group
    Creates an Access Point (AP) group.
  18. ap-heartbeat
    Configures the access point (AP) heartbeat interval.
  19. ap-internal-subnet
    Configures internal subnet for a tunnel.
  20. ap-model
    Specifies the AP model to be used.
  21. ap-routine-config-interval
    Sets the AP routine configuration interval.
  22. ap-routine-status-interval
    Sets the AP routine status interval.
  23. ap-subnet-discovery
    Enables the AP subnet discovery service.
  24. ap-zone-aggregate
    Enables zone aggregation for access points (APs).
  25. auth-method
    Specifies the authentication method to be used.
  26. auth-profile
    Enters Authentication Service Profile configuration mode to configure authentication services.
  27. auth-type
    Specifies the authentication type to be used.
  28. backup
    Backs up the whole cluster system of the controller.
  29. backup (Dataplane)
    Backs up the controller configurations.
  30. backup config
    Backs up the controller configurations.
  31. backup network
    Backs up controller network configuration.
  32. backup schedule
    Schedules a configuration backup.
  33. backup-upgrade
    Backs up and upgrades the whole cluster system for the controller.
  34. bonjour-policy
    Creates or updates the bonjour policy.
  35. bridge-profile
    Enters Bridge Profile configuration mode to configure bridge forwarding profiles.
  36. calea
    Configures the Communications Assistance for Law Enforcement Act (CALEA) server settings.
  37. calea-mac
    Configures the Communications Assistance for Law Enforcement Act (CALEA) MAC server settings.
  38. calea-server-ip
    Updates Calea server IP configurations.
  39. cert-store
    Creates or updates certificate store configurations.
  40. changepassword
    Changes the administrative password.
  41. clock
    Updates the system clock timezone configuration.
  42. clone
    Backs up the controller configuration and unique ID.
  43. cluster in-service
    Restores the cluster to a normal state.
  44. cluster-ip-list
    Updates the node IP address mapping list for the cluster configuration.
  45. cluster-redundancy
    Creates or updates a cluster redundancy configuration.
  46. controller
    Enters Controller configuration mode to configure the virtual data plane settings.
  47. controller-description
    Modifies or updates the controller description.
  48. copy
    Copy files from an external FTP server.
  49. copy ap-certificate-request
    Copies the AP certificate request to an external FTP server.
  50. copy backup
    Copies the backup file to an external TFTP or FTP server.
  51. copy backup-config
    Copy the backup configuration file to external TFTP or FTP server.
  52. copy backup-network
    Copies the backup network configuration file to an external TFTP or FTP server
  53. copy report-result
    Copies a report result to an external FTP server.