eap-aka

Enters EAP AKA configuration mode to update EAP AKA configurations.
Syntax
eap-aka [ enable ]

After the eap-aka command is entered to enable EAP AKA configuration mode, the following configuration syntax is available:

[ cache-cleanup | fast-reauth | no { cache-cleanup | fast-reauth | secret key | user-id-privacy } | secret key | user-id-privacy ]
Command Default

EAP AKA configuration mode is not enabled.

Parameters
enables
Enables EAP AKA.
cache-cleanup
Enables the cache cleanup setting.
fast-reauth
Enables fast re-authentication support.
no
Disables configurations.
secretkey
Sets the EAP-AKA active secret key number.
user-id-privacykey
Enables user identity privacy support.
Modes

Global configuration mode

Usage Guidelines

This command is supported on the SmartZone 300 and vSZ-H controllers only.

Examples

The following example enables EAP AKA.

device# config
device(config)# eap-aka enable

The following example enters EAP AKA configuration mode.

device# config
device(config)# eap-aka
device(config-eap-aka)#

The following example enables the cache cleanup setting.

device# config
device(config)# eap-aka
device(config-eap-aka)# cache-cleanup
Parent topic: Commands D through F