ap-cli

Enters debug AP CLI configuration mode for AP CLI debug script management.
Syntax
ap-cli

After the ap-cli command is entered to enable the debug AP CLI configuration mode, the following configuration syntax is available:

{ execute | show } zone zone-name
upload zone zone-name ftp-url
Parameters
execute
Executes the AP CLI script.
show
Shows the script execution summary of a specified zone.
upload
Uploads an AP CLI script from a remote FTP server
zone zone-name
Sets the default service.
ftp-url
Specifies the FTP URL.
Modes

Debug configuration mode

Usage Guidelines

This command is supported on the SmartZone 300 and vSZ-H controllers only.

Examples

The following example enters debug AP CLI configuration mode where AP CLI debug script management can be run. 

device# debug
device(debug)# ap-cli
device(debug-ap-cli)#
Parent topic: Commands A through C