ftp-server
Enters FTP server configuration mode to
create or update a FTP server.
Syntax
ftp-server
name
no
ftp-server
name
After the ftp-server
name
app
name
command is entered to enable FTP server configuration mode, the following
configuration syntax is available:
Command Default
An FTP server is not created or updated.
Parameters
Modes
Global configuration mode
Usage Guidelines
The no form of the command
deletes an FTP server. This command is supported on all SmartZone platforms except
SmartZone Data Plane controller.
Examples
The following example enters FTP server configuration mode and updates the FTP server configurations.
device# configure device(config)# ftp-server ftp1 ruckus(config-ftp-server)# host 1.1.1.1 ruckus(config-ftp-server)# port 21 ruckus(config-ftp-server)# protocol stp ruckus(config-ftp-server)# username test ruckus(config-ftp-server)# password Password: **** Retype: **** ruckus(config-ftp-server)# exit ruckus(config)#