`auth-type`

Specifies the authentication type to be used.

Syntax

Command Default

No authentication type is specified.

Parameters

guest-access: Specifies 802.1x EAP as the authentication type.
hotspot: Specifies Hotspot service (WISPr) as the authentication type.
hotspot2: Specifies Hotspot 2.0 as the authentication method.
osen: Specifies Hotspot 2.0 Secure Onboarding (OSEN) as the authentication method.
web-authentication: Specifies Web authentication as the authentication method.
wechat: Specifies WeChat as the authentication method.

Modes

WLAN Zone configuration mode

Usage Guidelines

This command is available only after othe following command is entered:

This command is supported on all SmartZone platforms except SmartZone Data Plane controller.

Examples

The following example creates a WLAN in zone Zone10, and sets the authentication type yo be guest access.

device# config
device(config)# zone zone10
device(config-zone)# wlan wlan20
device(config-zone-wlan)# auth-type guest-access

History

Release version	Command history
6.0	The command is not supported for IPsec configuration mode.

auth-type