ifIndex to interface ID2 lookup table

The ifIndex to interface ID2 lookup table maps ifindex values to the Interface ID lookup table. If the provides an ifIndex, this table returns the interface ID value.

Name, OID, and syntax

Access

Description

snIfIndexLookup2Table

brcdIp.1.1.3.3.8

None

The ifIndex to interface ID2 lookup table.

snIfIndexLookup2IfIndex

brcdIp.1.1.3.3.8.1.1

Syntax: Integer32

Read-only

Shows the interface in the ifIndex format.

snIfIndexLookup2InterfaceId

brcdIp.1.1.3.3.8.1.2

Syntax: InterfaceId

Read-only

Shows the interface ID, which consists of the following:

Octet 0 - Port type, which can be one of the following:

  • 7 - ATM Subif
  • 8 - MPLS Tunnel
  • 9 - ATM PVC
  • 10 - Management
  • 11 - Trunk
  • 12 - IP Tunnel (for IP tunnels, except MPLS)

Octet 1

  • If the value of Octet 0 is 1, then this octet shows the unit number of the device.

  • If the value of Octet 0 is 2, 3, 7, or 9, then this octet shows the slot number of the device.

    Note: These options are not supported for RUCKUS ICX products.

Octet 2 -

If the value of Octet 0 is 1, then this octet shows the slot number.

If the value of Octet 0 is 2, 3, 7, or 9, then this octet shows the port number.

Octet 3 -

If the value of Octet 0 is 1, then this octet shows the port number.

If the value of Octet 0 is 7 or 9, then this octet shows the ATM Subif number.

Octet 4 - If the value of Octet 0 is 9, then this octet shows the ATM VPI number.

Octet 5 - If the value of Octet 0 is 9, then this octet shows the ATM VCI number.

Parent topic: Interface ID Registration Group