The following table contains the general objects for the IP group.
Name, OID, and syntax
Access
Description
snRtClearArpCache
brcdIp.1.2.2.1.1
Syntax: ClearStatus
Read-write
Clears learned Address Resolution Protocol (ARP) entries but does not remove any static
ARP entries:
normal(0) - Do not clear learned entries.
clear(1) - Clear learned entries.
snRtClearIpCache
brcdIp.1.2.2.1.2
Syntax: ClearStatus
Read-write
Clears the entries in the IP forwarding cache table:
normal(0) - Do not clear entries.
clear(1) - Clear entries.
snRtClearIpRoute
brcdIp.1.2.2.1.3
Syntax: ClearStatus
Read-write
Clears the IP route tables:
normal(0) - Do not clear entries.
clear(1) - Clear entries.
snRtBootpServer
brcdIp.1.2.2.1.4
Syntax: IpAddress
Read-write
Shows the IP address of the bootp server to which bootp packets must be relayed.
snRtBootpRelayMax
brcdIp.1.2.2.1.5
Syntax: Integer
Read-write
Specifies the maximum number of hops the bootp packet should travel.
Valid values: Up to 15 hops
snRtArpAge
brcdIp.1.2.2.1.6
Syntax: Integer
Read-write
Specifies the number of minutes that an ARP entry can be valid without having it to
be relearned.
Valid values: Up to 240 minutes. A value of zero (0) means that the entry will not
age out.
snRtIpIrdpEnable
brcdIp.1.2.2.1.7
Syntax: Integer
Read-write
Indicates if router advertisement is enabled on this device:
disabled(0)
enabled(1)
snRtIpLoadShare
brcdIp.1.2.2.1.8
Syntax: Integer
Read-write
Indicates if more than one route is enabled to share the loads:
disabled(0)
enabled(1)
snRtIpProxyArp
brcdIp.1.2.2.1.9
Syntax: Integer
Read-write
Indicates if the proxy ARP function is enabled:
disabled(0)
enabled(1)
snRtIpRarp
brcdIp.1.2.2.1.10
Syntax: Integer
Read-write
Indicates if the RARP server is enabled:
disabled(0)
enabled(1)
snRtIpTtl
brcdIp.1.2.2.1.11
Syntax: Integer
Read-write
Indicates the time-to-live (TTL) value that will be used in the IP header of an IP
packet that was generated by this device.
Valid values: 1 - 255
snRtIpSetAllPortConfig
brcdIp.1.2.2.1.12
Syntax: Integer32
Read-write
Shows the index number of a row. All the writeable
data from that row will be copied to all appropriate rows in all
IPinterface port configuration table.
Note: Prior to setting this object, make sure that the row identified in this object contains
a value for all its objects; otherwise, the current data of the row will be used to
set the entire IP interface configuration table.
snRtIpFwdCacheMaxEntries
brcdIp.1.2.2.1.13
Syntax: Integer32
Read-only
Shows the maximum number of entries in the IP forwarding cache table.
snRtIpFwdCacheCurEntries
brcdIp.1.2.2.1.14
Syntax: Integer32
Read-only
Shows the current number of entries in the IP forwarding cache table.
snRtIpMaxStaticRouteEntries
brcdIp.1.2.2.1.15
Syntax: Integer
Read-only
Shows the maximum number of entries in the IP static route table.
snRtIpDirBcastFwd
brcdIp.1.2.2.1.16
Syntax: Integer
Read-write
Indicates if the directed broadcast forwarding feature is enabled:
disabled(0)
enabled(1)
snRtIpLoadShareNumOfPaths
brcdIp.1.2.2.1.17
Syntax: Integer32
Read-write
Specifies the number of routes to be used to share the load.
snRtIpLoadShareMaxPaths
brcdIp.1.2.2.1.18
Syntax: Integer32
Read-only
Indicates the maximum number of routes that can be configured to share the load.
snRtIpLoadShareMinPaths
brcdIp.1.2.2.1.19
Syntax: Integer32
Read-only
Indicates the minimum number of routes that can be configured to share the load.
snRtIpProtocolRouterId
brcdIp.1.2.2.1.20
Syntax: IpAddress
Read-write
Shows the router ID for all Internet Protocols.
snRtIpSourceRoute
brcdIp.1.2.2.1.21
Syntax: Integer
Read-write
Indicates if strict source routing is enabled to drop source routed packets: