The following objects from RFC 1213 are the standard objects that are supported in
the IP MIB. They are used to set SNMP traps.
Name, OID, and syntax
Access
Description
snmpInTraps
1.3.6.1.2.1.11.19
Read-only
Shows the total number of SNMP trap PDUs that have been accepted and processed by
SNMP.
snmpOutTraps
1.3.6.1.2.1.11.29
Read-only
Shows the total number of SNMP trap PDUs that have been generated by SNMP.
snmpEnableAuthenTraps
1.3.6.1.2.1.11.30
Read-write
Indicates if the SNMP agent process is permitted to generate authentication failure
traps. The value of this object overrides any configuration information. This objects
provides a way to disable all authentication failure traps.
Note: It is strongly recommended that this object to be stored in the nonvolatile memory
so that it remains constant between re-initializations of the network management system.
lldpRemTablesChange
1.0.8802.1.1.2.1.4.1
None
An lldpRemTablesChange notification is sent when the value of lldpStatsRemTableLastChangeTime
changes. It can be used by an NMS to trigger LLDP remote systems table maintenance
polls.
Note: Transmission of lldpRemTablesChange notifications is throttled by the agent, as specified
by the lldpNotificationInterval object.
lldpXMedTopologyChangeDetected
1.0.8802.1.1.2.1.5.4795.0.1
None
Allows a device to transfer information related to topology changes to management
applications in an asynchronous manner. Specifically, this enables notification of
the fact that a new remote device was connected to the local port of an LLDP-MED network
connectivity device, or that a remote device was removed from the local port. The
purpose of this notification is efficient, near-real-time transmission of information
regarding moves and changes to the management applications. Information carried by
the list of objects (varbind) contained in the notification allows the receiving management
application to uniquely identify the local port where the topology change occurred,
as well as the device capability of the remote endpoint device that was attached to
or removed from the port.
lldpXMedLocalData
1.0.8802.1.1.2.1.5.4795.1.2
None
The MIB module to define LLDP-MED.
lldpXMedLocMediaPolicyTable
1.0.8802.1.1.2.1.5.4795.1.2.1
None
This table contains one row per policy type per port of media policy information
(as a part of the MED organizational extension) on the local system known to this
agent.
lldpXMedLocMediaPolicyEntry
1.0.8802.1.1.2.1.5.4795.1.2.1.1
None
Information about a particular policy on a specific port component.
lldpXMedLocMediaPolicyAppType
1.0.8802.1.1.2.1.5.4795.1.2.1.1.1
Syntax: PolicyAppType
None
The media type that defines the primary function of the application for the policy
advertised by an endpoint.
lldpXMedLocMediaPolicyVlanID
1.0.8802.1.1.2.1.5.4795.1.2.1.1.2
Syntax: Integer32
Read-only
An extension of the VLAN Identifier for the port, as defined in IEEE 802.1P-1998.
A value of 1 through 4094 is used to define a valid PVID. A value of 0 shall be used
if the device is using priority tagged frames, meaning that only the 802.1p priority
level is significant and the default VID of the ingress port is being used instead.
A value of 4095 is reserved for implementation use.
lldpXMedLocMediaPolicyPriority
1.0.8802.1.1.2.1.5.4795.1.2.1.1.3
Syntax: Integer32
Read-only
This object contains the value of the 802.1p priority which is associated with the
given port on the local system.
lldpXMedLocMediaPolicyDscp
1.0.8802.1.1.2.1.5.4795.1.2.1.1.4
Syntax: DSCP
Read-only
This object contains the value of the Differentiated Service Code Point (DSCP) as
defined in IETF RFC 2474 and RFC 2475 which is associated with the given port on the
local system.
lldpXMedLocMediaPolicyUnknown
1.0.8802.1.1.2.1.5.4795.1.2.1.1.5
Syntax: TruthValue
Read-only
A value of 'true' indicates that the network policy for the specified application
type is currently unknown. In this case, the VLAN ID, the layer 2 priority and the
DSCP value fields are ignored. A value of 'false' indicates that this network policy
is defined.
lldpXMedLocMediaPolicyTagged
1.0.8802.1.1.2.1.5.4795.1.2.1.1.6
Syntax: TruthValue
Read-only
A value of 'true' indicates that the application is using a tagged VLAN. A value
of 'false' indicates that for the specific application the device either is using
an untagged VLAN or does not support port based VLAN operation. In this case, both
the VLAN ID and the Layer 2 priority fields are ignored and only the DSCP value has
relevance.
The following table shows the OIDs that are associated with each CLI option that we
can enable or disable on the switch. For example, If you enable the option authentication,
all the OIDs associated with the authentication option gets enabled and vice versa.
CLI-option
OID and syntax
Description
authentication
authenticationFailure
1.3.6.1.6.3.1.1.5.5
An authenticationFailure trap signifies that the
SNMP entity has received a protocol message that is not properly
authenticated. While all implementations of SNMP entities may be
capable of generating this trap, the snmpEnableAuthenTraps object
indicates whether this trap will be generated.
snTrapUserLogin
1.3.6.1.4.1.1991.0.75
A user logged in to a device.
snTrapUserLogout
1.3.6.1.4.1.1991.0.76
A user logged out of a device.
mac-authentication
snTrapMacAuthEnable
1.3.6.1.4.1.1991.0.85
The SNMP trap that is generated when MAC-Authentication is enabled on an interface.
snTrapMacAuthDisable
1.3.6.1.4.1.1991.0.86
The SNMP trap that is generated when MAC-Authentication is disabled on an interface.
snTrapMacAuthMACAccepted
1.3.6.1.4.1.1991.0.87
The SNMP trap that is generated when MAC-Authentication is successful on an interface.
snTrapMacAuthMACRejected
1.3.6.1.4.1.1991.0.88
The SNMP trap that is generated when MAC-Authentication is failed on an interface.
snTrapMacAuthPortDisabled
1.3.6.1.4.1.1991.0.89
The SNMP trap that is generated when an interface is disabled due to MAC-Authentication
detecting a DOS attack on that interface.
snTrapMacAuthVlanIdChange
1.3.6.1.4.1.1991.0.138
VLAN ID of a port has changed.
snTrapMacAuthRadiusTimeout
1.3.6.1.4.1.1991.0.143
The SNMP trap that is generated when a request from Mac- Auth to RADIUS has not been
answered within the retry and time limit.
snTrapMacBasedVlanEnabled
1.3.6.1.4.1.1991.0.147
MAC-based VLAN is enabled.
snTrapMacBasedVlanDisabled
1.3.6.1.4.1.1991.0.148
MAC-based VLAN is disabled.
cold-start
coldStart
1.3.6.1.6.3.1.1.5.1
Indicates that the sending protocol entity is reinitializing itself; the agent's configuration
or the protocol entity implementation may be altered.
warmStart
1.3.6.1.6.3.1.1.5.2
Indicates that the sending protocol entity is reinitializing itself; however, the
agent configuration or the protocol entity implementation is not altered.
fan-failure
snTrapChasFanFailed
1.3.6.1.4.1.1991.0.31
A fan in the device failed.
snTrapChasFanOK
1.3.6.1.4.1.1991.0.1000
This trap is generated when a fan operational status changed from failure to normal
or change in the fan speed due to temperature variations downwards.
snTrapStackingChasFanNormal
1.3.6.1.4.1.1991.0.168
The SNMP trap that is generated when a fan operational status changed from failure
to normal for a stacking system.
snTrapStackingChasFanFailed
1.3.6.1.4.1.1991.0.169
The SNMP trap that is generated when a fan fails to operate normally for a stacking
system.
Link down
linkDown
1.3.6.1.6.3.1.1.5.3
A linkDown trap signifies that the SNMP entity acting in an agent role, has detected
that the ifOperStatus object for one of its communication links is about to enter
the down state from some other state (but not from the notPresent state). This other
state is indicated by the included value of ifOperStatus.
Link up
linkUp
1.3.6.1.6.3.1.1.5.4
A linkUp trap signifies that the SNMP entity acting in an agent role, has detected
that the ifOperStatus object for one of its communication links left the down state
and transitioned into some other state (but not into the notPresent state). This other
state is indicated by the included value of ifOperStatus.
Module inserted
snTrapModuleInserted
1.3.6.1.4.1.1991.0.28
A module was inserted into the chassis while the system is running.
Module removed
snTrapModuleRemoved
1.3.6.1.4.1.1991.0.29
A module was removed from the chassis while the system is running.
new-root
newRoot
1.3.6.1.2.1.17.0.1
Indicates that the sending agent has become the new root of the Spanning Tree. The
trap is sent by a bridge soon after its election as the new root, for example, upon
expiration of the Topology Change Timer immediately subsequent to its election.
OSPF
snTrapospfIfStateChange
1.3.6.1.2.1.14.16.2.3
There has been a change in the state of a non-virtual OSPF interface. This trap should
be generated when the interface state regresses (for example, goes from Dr to Down)
or progresses to a terminal state (for example, Point-to-Point, DR Other, Dr, or Backup).
Note: You must configure the log adjacency command under the "router ospf" mode to see traps.
BGP
bgp4V2EstablishedNotification
1.3.6.1.4.1.1991.3.5.1.0.1
The Border Gateway Protocol (BGP) peer is up.
bgp4V2BackwardTransitionNotification
1.3.6.1.4.1.1991.3.5.1.0.2
The Border Gateway Protocol (BGP) peer is down.
VRRP
snTrapVrrpeIfStateChange
1.3.6.1.4.1.1991.0.82
The SNMP trap that is generated when a VRRPE routing device switched between states
master, backup, initialized or unknown.
snTrapVrrpIfStateChange
1.3.6.1.4.1.1991.0.34
A VRRP routing device changedstate from master to backup or vice versa.
Power-supply-failure
snTrapChasPwrSupplyOK
1.3.6.1.4.1.1991.0.81
The SNMP trap that is generated when a power supply operational status changes from
failure to normal.
snTrapChasPwrSupplyFailed
1.3.6.1.4.1.1991.0.30
A power supply in the device failed.
redundant-module
snTrapMgmtModuleRedunStateChange
1.3.6.1.4.1.1991.0.35
The management module changed its redundancy state.
Temperature
snTrapTemperatureWarning
1.3.6.1.4.1.1991.0.36
The actual temperature
reading is above the warning temperature threshold.
snTrapStackingTemperatureWarning
1.3.6.1.4.1.1991.0.171
This trap is generated
when the actual temperature reads above the warning temperature
threshold in case of a stacking unit.
metro-ring
snTrapMrpStateChange
1.3.6.1.4.1.1991.0.79
An MRP state change occurred.
UDLD
snTrapUDLDLinkUp
1.3.6.1.4.1.1991.0.146
The SNMP trap that is generated when the UDLD port link status has changed to up.
snTrapUDLDLinkDown
1.3.6.1.4.1.1991.0.145
The SNMP trap that is generated when the UDLD port link status has changed to down.
link-oam
dot3OamNonThresholdEvent
1.3.6.1.2.1.158.0.2
This event is sent when a local or remote non-threshold crossing event is detected.
snTrapLinkOAMLinkUp
1.3.6.1.4.1.1991.0.183
This trap is generated when Link-OAM port link status is changed to up.
snTrapLinkOAMLinkDown
1.3.6.1.4.1.1991.0.182
This trap is generated when Link-OAM port link status is changed to down.
snTrapLinkOAMLoopbackEntered
1.3.6.1.4.1.1991.0.185
This trap is generated when Link-OAM port has entered the loopback mode. The link
is not useful for data transfer any more.
snTrapLinkOAMLoopbackCleared
1.3.6.1.4.1.1991.0.186
This trap is generated when Link-OAM port has cleared the loopback mode.
mac-notification
snTrapMacNotification
1.3.6.1.4.1.1991.0.201
The SNMP notification is generated when MAC events are detected.
Syslog
syslogMsgNotification
1.3.6.1.2.1.192.0.1
The syslogMsgNotification is generated when a new
SYSLOG message is received and the value of
syslogMsgGenerateNotifications is true.
ipsec
brcdIPSecModuleNotification
brcdIp.1.1.15.1.0.14
The SNMP trap that is generated when IPsec module state is changed.
Note: This notification is supported only on the Ruckus ICX 7450 device.
brcdIPSecSessionNotification
brcdIp.1.1.15.1.0.12
The SNMP trap that is generated when IPsec session state is changed.
Note: This notification is supported only on the Ruckus ICX 7450 device.
brcdIKEInvalidMsgTypeNotification
brcdIp.1.1.15.1.0.8
The SNMP trap that is generated when an invalid IKE message Type is received.
Note: This notification is supported only on the Ruckus ICX 7450 device.
brcdIKEInvalidPayloadNotification
brcdIp.1.1.15.1.0.9
The SNMP trap that is generated when an invalid IKE payload is received.
Note: This notification is supported only on the Ruckus ICX 7450 device.
ikev2
brcdIKEMaxPeerReachedStackingNotification
brcdIp.1.1.15.1.0.15
The SNMP trap that is generated when maximum IKE peer limit is reached.
Note: This notification is supported only on the Ruckus ICX 7450 device.
brcdIKERecoveredMaxPeerLimit StackingNotification
brcdIp.1.1.15.1.0.16
The SNMP trap that is generated when the system recovers from the maximum IKE peer
limit condition.
Note: This notification is supported only on the Ruckus ICX 7450 device.
brcdIKESessionNotification
brcdIp.1.1.15.1.0.13
The SNMP trap that is generated when IKEv2 session state is changed.
Note: This notification is supported only on the Ruckus ICX 7450 device.
entity-cfg-change
entConfigChange
1.3.6.1.2.1.47.2.0.1
This notification is generated when the value of entLastChangeTime is changed, and
occurs if the time interval is 5 minutes between the changes in the entLastChangeTime.
topology-change
newRoot
1.3.6.1.2.1.17.0.1
Indicates that the sending agent has become the new root of the Spanning Tree. The
trap is sent by a bridge soon after its election as the new root, for example, upon
expiration of the Topology Change Timer immediately subsequent to its election.
topologyChange
1.3.6.1.2.1.17.0.2
Sent by a bridge when any of its configured ports transitions from the Learning state
to the Forwarding state, or from the Forwarding state to the Blocking state. The trap
is not sent if a newRoot trap is sent for the same transition.