Power Over Ethernet port table

The following table presents information about the FastIron X Series POE ports.

Name, OID, and syntax

Access

Description

snAgentPoePortNumber

brcdIp.1.1.2.14.2.2.1.1

Syntax:InterfaceIndex

Read-only

The port number in the ifIndex value.

snAgentPoePortControl

brcdIp.1.1.2.14.2.2.1.2

Syntax: Integer

Read-create

Powers on or off the inline power on a port. If a port does not have inline power capability, reading this object returns other(1). Valid values are:

  • other(1)
  • disable(2)
  • enable(3)
  • enableLegacyDevice(4)
snAgentPoePortWattage

brcdIp.1.1.2.14.2.2.1.3

Syntax: Integer32

Read-create

Adjusts the inline power wattage. Valid values are from 1000 through 15400(IEEE802_3AF)/30000(IEEE802_3AT). Each unit is in milliwatts. This object can only be set after snAgentPoePortControl has been set to “enable(3)” or “enableLegacyDevice(4)”. If a port does not have inline power capability, reading this object returns an undefined value.

snAgentPoePortClass

brcdIp.1.1.2.14.2.2.1.4

Syntax: Integer32

Read-create

Adjusts the inline power class. Valid values are from 0 through 3(IEEE802_3AF)/4(IEEE802_3AT). This object can only be set after snAgentPoePortControl has been set to “enable(3)” or “enableLegacyDevice(4)”. If a port does not have inline power capability, reading this object returns an undefined value.

snAgentPoePortPriority

brcdIp.1.1.2.14.2.2.1.5

Syntax: Integer

Read-create

Shows the inline power allocation priority for the power device:

  • invalid(0) - Not a POE port
  • critical(1)
  • high(2)
  • low(3)
  • medium(4)
  • other(5)
snAgentPoePortConsumed

brcdIp.1.1.2.14.2.2.1.6

Syntax: Integer32

Read-only

Amount of inline power consumed by the port. Each unit is in milliwatts.

snAgentPoePortType

brcdIp.1.1.2.14.2.2.1.7

Syntax: DisplayString

Read-only

Inline power device type: 802.3af, 802.3at, or legacy device.

snAgentPoePortPDClass

brcdIp.1.1.2.14.2.2.1.8

Syntax: Integer32

Read-only

This is a power device (PD) signature which the device learns in the process of PD-classification. PD defection and PD-classification are two steps in powering PD. If the PD is powered with user power Specification, then the PoE port power limit will be set based on PD-detected class.

snAgentPoePortPDClassB

brcdIp.1.1.2.14.2.2.1.9

Syntax: Integer32

Read-only

The second PD class signature of dual signature PD which the device learns in the process of PD-classification. PD detection and PD-classification are two steps of powering PD. If PD is powered without user power specification, then PoE port power limit will be set based on both PD detected classes. The value PDClassB is valid for dual signature PD (IEEE 802.3bt module) having PDClassA and PDClassB.The value is 0, if PD is not dual signature.

Parent topic: Power Over Ethernet MIB