RFC 1493: Definitions of Managed Objects for Bridges

The following groups are supported on RUCKUS ICX devices.

Object group name

Object identifier

dot1dBridge

1.3.6.1.2.1.17

dot1dBase

1.3.6.1.2.1.17.1

dot1dStp

1.3.6.1.2.1.17.2

dot1dTp 1.3.6.1.2.1.17.4
dot1dTpFdbTable 1.3.6.1.2.1.17.4.3
dot1dTpPortTable 1.3.6.1.2.1.17.4.4
dot1dTpHCPortTable 1.3.6.1.2.1.17.4.5
dot1dTpPortOverflowTable 1.3.6.1.2.1.17.4.6
dot1dExtBase 1.3.6.1.2.1.17.6.1.1
dot1dPortCapabilitiesTable 1.3.6.1.2.1.17.6.1.1.4
dot1dPortPriorityTable 1.3.6.1.2.1.17.6.1.2.1
dot1dTrafficClassTable 1.3.6.1.2.1.17.6.1.2.3
dot1dPortGarpTable 1.3.6.1.2.1.17.6.1.3.1

Object group name

Object identifier

dot1qBase 1.3.6.1.2.1.17.7.1.1
dot1qTp 1.3.6.1.2.1.17.7.1.2
dot1qFdbTable 1.3.6.1.2.1.17.7.1.2.1
dot1qTpFdbTable 1.3.6.1.2.1.17.7.1.2.2
dot1qVlan 1.3.6.1.2.1.17.7.1.4
dot1qVlanCurrentTable 1.3.6.1.2.1.17.7.1.4.2
dot1qVlanStaticTable 1.3.6.1.2.1.17.7.1.4.3
dot1qPortVlanTable 1.3.6.1.2.1.17.7.1.4.5
dot1vProtocol 1.3.6.1.2.1.17.7.1.5
dot1vProtocolGroupTable 1.3.6.1.2.1.17.7.1.5.1
dot1vProtocolPortTable 1.3.6.1.2.1.17.7.1.5.2
Note: The dot1dTpFdbTable (OID 1.3.6.1.2.1.17.4.3) in RFC 1493 is used to find dynamically learned MAC addresses. Statically configured MAC addresses are in the snFdbTable (refer to “Forwarding database static table information” on page 351).
Note: The SNMP MIB object dot1dStpPortTable (OID 1.3.6.1.2.1.17.2.15) does not display information for tagged ports that belong to an 802.1W RSTP configuration. The design of that MIB table is based on a Single STP standard, and does not accommodate Multiple STPs. Thus, the table displays information only for SSTP and for tagged and untagged ports.
Note: RFC 4188 has been converted to SMIv2 format. The object dot1dStpPortPathCost32 was added to support IEEE 802. The existing MIB dot1dStpPortPathCost has an upper range of 65535. Over that value, this MIB stays at the upper value and you should access dot1dStpPortPathCost32, which has a higher upper-range value.
Parent topic: Supported Standard MIBs