Stacking configuration unit table

Use the following table to display and configure stacking information for each unit.

Name, OID, and syntax	Access	Description
snStackingConfigUnitTable brcdIp.1.1.3.31.2.1	None	The stacking configuration table.
snStackingConfigUnitIndex brcdIp.1.1.3.31.2.1.1.1 Syntax: Integer	None	The ID of the unit in a stack.
snStackingConfigUnitPriority brcdIp.1.1.3.31.2.1.1.2 Syntax: Integer32	Read-write	The priority in active or backup election. Value can be from 0 through 255.
snStackingConfigUnitConfigStackPort brcdIp.1.1.3.31.2.1.1.3 Syntax: InterfaceIndex	Read-write	Not supported beginning release 08.0.90. The IfIndex for the configured stacking port. If no stacking port is configured, this object displays zero and the first two 10 Gigabit ports as the default stacking ports. Enter zero to remove the configured stacking port.
snStackingConfigUnitRowStatus brcdIp.1.1.3.31.2.1.1.4 Syntax: Integer	Read-write	This object is used to delete a row in the table and control if they are used. The following values can be written for a SET: delete(3) - Deletes the row. Deleted rows are deleted immediately. The following values can be returned on reads: noSuchName - No such row other(1) - Some other cases valid(2) - The row exists and is valid
snStackingConfigUnitType brcdIp.1.1.3.31.2.1.1.5 Syntax: DisplayString	Read-only	A description of the configured or active system type for each unit.
snStackingConfigUnitState brcdIp.1.1.3.31.2.1.1.6 Syntax: Integer	Read-only	The state of the unit: local(1) remote(2) reserved(3) empty(4)
snStackingConfigUnitStackPort1 brcdIp.1.1.3.31.2.1.1.7 Syntax: InterfaceIndex	Read-write	First stack port for each unit. It returns 0 if the stack port does not exist.
snStackingConfigUnitStackPort2 brcdIp.1.1.3.31.2.1.1.8 Syntax: InterfaceIndex or zero	Read-write	Second stack port for each unit. It returns 0 if the stack port does not exist.
snStackingConfigUnitStackTrunk1 brcdIp.1.1.3.31.2.1.1.11 Syntax: Octet String	Read-write	A list of interface indices which are the port membership of a stack trunk on unit. Each interface index is a 32-bit integer in big endian order. It returns NULL if stack trunk does not exist. Entering an empty octet string means to delete this stack trunk. Note that the maximum stack trunk on a unit is 2. Each stack trunk contains up to 16 ports.
snStackingConfigUnitStackTrunk2 brcdIp.1.1.3.31.2.1.1.12 Syntax: Octet String	Read-write	A list of interface indices which are the port membership of a stack trunk on unit. Each interface index is a 32-bit integer in big endian order. It returns NULL if stack trunk does not exist. Entering empty octet string means to delete this stack trunk. Note that the maximum stack trunk on an unit is 2. Each stack trunk contains up to 16 ports.
snStackingConfigUnitName brcdIp.1.1.3.31.2.1.1.13 Syntax: DisplayString (Size 0 - 64)	Read-write	A name description of stacking unit.

RUCKUS FastIron MIB Reference, 08.0.95 53-1005660-08

Stacking configuration unit table