IP source guard binding table

The following table is used to configure IP source entries.

Name, OID, and syntax	Access	Description
fdryIpSrcGuardBindTable 1.3.6.1.4.1.1991.1.1.3.37.3.1	Not-accessible	A table provides the information of IP addresses used IP Source Guard purpose at each physical interface with or without specific VLAN memberships.
fdryIpSrcGuardBindIpAddr 1.3.6.1.4.1.1991.1.1.3.37.3.1.1.1 Syntax: IpAddress	Not-accessible	The device IP address.
fdryIpSrcGuardBindVlanId 1.3.6.1.4.1.1991.1.1.3.37.3.1.1.2 Syntax: Unsigned 32	Read-create	This object indicates the specific VLAN memberships on this interface. The VLAN number is optional. If you configure a VLAN number, the binding applies only to that VLAN. If you do not configure a VLAN number, the static applies to all VLANs associated with the port. In this case, the VLAN number will be displayed as “0”.
fdryIpSrcGuardBindRowStatus 1.3.6.1.4.1.1991.1.1.3.37.3.1.1.3 Syntax: RowStatus	Read-create	This variable is used to create, or delete a row in this table. When a row in this table is in active(1) state, no objects in that row can be modified except this object. To create a new static entry use integer 4 and to delete an existing entry use integer 6 along with fdryIpSrcGuardBindVlanId.
fdryIpSrcGuardBindMode 1.3.6.1.4.1.1991.1.1.3.37.3.1.1.4 Syntax: BindMode	Read-only	The mode of the IP source guard entry: other(1) active(2) inactive(3)
fdryIpSrcGuardBindType 1.3.6.1.4.1.1991.1.1.3.37.3.1.1.5 Syntax: BindType	Read-only	The type of the IP source guard entry: other(1) ip(2)