snAgentBrdTable
brcdIp.1.1.2.2.1
|
None
|
A table of each physical board information.
|
snAgentBrdIndex
brcdIp.1.1.2.2.1.1.1
Syntax: Integer32
|
Read-only
|
The index to the agent board table.
Valid values: 1 - 42
|
snAgentBrdMainBrdDescription
brcdIp.1.1.2.2.1.1.2
Syntax: DisplayString
|
Read-only
|
Contains the main board description. This object can have up to 128 characters.
|
snAgentBrdMainBrdId
brcdIp.1.1.2.2.1.1.3
Syntax: Octet String
|
Read-only
|
The main board identifier, which can uniquely identify a board type. It is an encoded
octet string. The octets in the string provide the following information:
Octet 0 - Identifies the format of this object’s octet string. If the format version has
a value of 2, the octets after the version octet have the following meaning:
Octet 1 - Product type:
- BI_WG - 0x57
- BI_BB - 0x42
- BI_NI - 0x4E
- BI_NI2 - 0x32
- NI_M4 - 0x4D
- BI_SLB - 0x53
Octet 2 - Module type:
- MASTER_FIBER_8G - 0x0
- MASTER_FIBER_4G - 0x1
- MASTER_COPPER_16 - 0x2
- SLAVE_FIBER_4G - 0x3
- FI_MASTER_FIBER_2G - 0x4
- FI_MASTER_FIBER_4G - 0x5
- MASTER_COPPER_8G - 0x6
- FI_MASTER_FIBER_8G - 0x7
- SLAVE_FIBER_8G - 0x8
- MASTER_COPPER_12_2 - 0x9
- SLAVE_COPPER_24 - 0xA
|
| |
|
- FI_SLAVE_COPPER_24 - 0xB
- SLAVE_100FX_16 - 0xC
- SLAVE_100FX_8 - 0xD
- SLAVE_COPPER_8G - 0xE
- SLAVE_COPPER_16_2 - 0xF
- STACK_FIBER_8G - 0x10
- STACK_COPPER_8G - 0x11
- MASTER_FIBER_2G - 0x12
- SLAVE_100FX_24 - 0x13
- MASTER_FIBER_0G - 0x14
- POS_622M - 0x15
- POS_155M - 0x16
- SLAVE_FIBER_2G - 0x17
- SLAVE_COPPER_2G - 0x18
- FI_SLAVE_FIBER_2G - 0x19
- FI_SLAVE_FIBER_4G - 0x1A
- FI_SLAVE_FIBER_8G - 0x1B
- FI_SLAVE_COPPER_8G - 0x1C
- FI_MASTER_COPPER_8G - 0x1D
- POS_155M2P - 0x1E
|
| |
|
- FI_MASTER_COPPER_4G - 0x1F
- FI_MASTER_COPPER_2G - 0x20
- MASTER_COPPER_4G - 0x21
- MASTER_COPPER_2G - 0x22
- MASTER_M4_8G - 0x23
- MASTER_M4_4G - 0x24
- MASTER_M4_2G - 0x25
- MASTER_M4_0G - 0x26
- MASTER_M5_0G - 0x27
- POS_2488M - 0x28
- SLAVE_M5_0G - 0x29
- POS_N2488M - 0x2A
- STACK_IPC_48_2 - 0x2B
- SLAVE_NPA_FIBER_4G - 0x2C
- ATM_2PORT - 0x2D
- ATM_4PORT - 0x2E
- SLAVE_FIBER_10G - 0x2F
- STACK_FES_48_2 - 0x30
- STACK_FES_24_2 - 0x31
- STACK_FES_96_4 - 0x32
- STACK_FES_12G - 0x33
|
| |
|
- STACK_FESX_24G - 0x34
- STACK_FESX_24_2_G - 0x35
- STACK_FESX_24_1_G - 0x36
- STACK_FESX_48G - 0x37
- STACK_FESX_48_2_G - 0x38
- STACK_FESX_48_1_G - 0x39
- SUPERX_FI_MGMT - 0x40
- SUPERX_FI_2P10G - 0x41
- SUPERX_FI_24GC - 0x42
- SUPERX_FI_24GF - 0x43
- SUPERX_FI_2P10G_WAN - 0x44
- SUPERX_FI_MGMT_II - 0x4a
- SLAVE_JC_48E - 0xC3
- SLAVE_JC_48T - 0xC4
- MASTER_JC_M4_8G - 0xC5
- SLAVE_JC_8G - 0xC6
- SLAVE_JC_B16GF - 0xC8
- MASTER_JC_B2404 - 0xC9
- SLAVE_JC_B16GC - 0xCA
- SLAVE_JC_B24FX - 0xCE
|
| |
|
Octet 3 - Processor type:
- PVR_M603 - 3
- PVR_M604 - 4
- PVR_M603E - 6
- PVR_M603EV - 7
- PVR_M750 - 8
- PVR_M604E - 9
- PVR_M8245 - 81
Octet 4 to Octet 5 - Processor speed in MHz
Octet 6 - MAC type:
- MAC_None - 0
- MAC_SEEQ_10_100 - 1
- MAC_DEC_10_100 - 2
- MAC_3COM_10_100 - 3
- MAC_X10GMAC_10000 - 4
- MAC_SEEQ_1000 - 5
- MAC_GMAC_1000 - 6
- MAC_VLSI_1000 - 7
|
| |
|
Octet 7 - PHY type:
- PHY_NONE - 0
- PHY_QSI - 1
- PHY_BROADCOM - 2
- PHY_ICS - 3
- PHY_NATIONAL - 4
- PHY_LEVEL1 - 6
- PHY_BROADCOM_10_100 - 7
- PHY_LEVEL24 - 8
- PHY_BROADCOM_10000 - 9
- PHY_3COM_10_100 - 9 (for others)
Octet 8 - Port type:
Octet 9 - Fiber port type:
|
| |
|
- NONFIBER - 0
- SX_FIBER - 1
- LX_FIBER - 2
- LHX_FIBER - 3
- LX_SX_FIBER=4
- LHB_FIBER=5
Octet 10 to Octet 13 - Size of DRAM in Kilobytes
Octet 14 to Octet 17 - Size of boot flash in Kilobytes
Octet 18 to Octet 21 - Size of code flash in Kilobytes
Octet 22 to Octet 27 - Serial number
Octet 28 - Chassis backplane type:
- chassis4000 = 0x00
- chassis8000 = 0x02
- chassis15000 = 0x01
- chassisFISX = 0x04
- Turbo8 = 0x07 (stack2)
- FastIron2 = 0x06 (stack1)
|
snAgentBrdMainPortTotal
brcdIp.1.1.2.2.1.1.4
Syntax: Integer32
|
Read-only
|
Shows the total number of ports on the main board.
|
snAgentBrdStatusLeds
brcdIp.1.1.2.2.1.1.8
Syntax: Integer32
|
Read-only
|
The object is replaced by the object snAgentBrdStatusLedString.
The value of this LED can be one of the following:
- 0 - off (Link off)
- 1 - on (Link on)
|
snAgentBrdTrafficLeds
brcdIp.1.1.2.2.1.1.9
Syntax: Integer32
|
Read-only
|
The object is replaced by the object snAgentBrdTrafficLedString.
The value of this LED can be one of the following:
- 0 - off (No traffic)
- 1 - on (Traffic is flowing)
|
snAgentBrdMediaLeds
brcdIp.1.1.2.2.1.1.10
Syntax: Integer32
|
Read-only
|
Applies to devices that have an LED for media type, but this object has been replaced
by the object snAgentBrdMediaLedString.
The value of this LED can be one of the following:
- 0 - Half-duplex
- 1 - Full-duplex
|
snAgentBrdSpeedLeds
brcdIp.1.1.2.2.1.1.11
Syntax: Integer32
|
Read-only
|
Applies to devices that have an LED for board speed. This object has been replaced
by the object snAgentBrdSpeedLedString.
The value of this LED can be one of the following:
|
snAgentBrdModuleStatus
brcdIp.1.1.2.2.1.1.12
Syntax: Integer
|
Read-only
|
Shows the status of a module:
- moduleEmpty(0) - The slot of the chassis is empty.
- moduleGoingDown(2) - The module is going down.
- moduleRejected(3) - The module is being rejected due to a wrong configuration.
- moduleBad(4) - The module hardware is bad.
- moduleConfigured(8) - The module is configured (stacking).
- moduleComingUp(9) - The module is in power-up cycle.
- moduleRunning(10) - The module is running.
- moduleBlocked(11) - The module is blocked for full height card.
By default, this mode is set to notActivated(0).
|
snAgentBrdRedundantStatus
brcdIp.1.1.2.2.1.1.13
Syntax: Integer
|
Read-only
|
Shows the status of the redundant module. Non-management modules always return other(1).
The management module returns the rest of the states:
- other(1)
- active(2)
- standby(3)
- crashed(4)
- comingUp(5)
|
snAgentBrdStatusLedString brcdIp.1.1.2.2.1.1.17 Syntax: Octet String
|
Read-only
|
The object contains an octet string that shows the value of the
status of the link LED on the front panel. Each LED is encoded into
1 bit for each switch port. The value of each bit can be one of the following: - 0 - Link is off
- 1 - Link is on
|
snAgentBrdTrafficLedString brcdIp.1.1.2.2.1.1.18 Syntax: Octet String
|
Read-only
|
A bit array that contains the value of the front panel traffic LEDs.
This is a packed bit string; each LED is encoded into 1 bit for each
switch port. The value of each bit can be one of the following: - 0 - No traffic
- 1 - Traffic is flowing
|
snAgentBrdMediaLedString brcdIp.1.1.2.2.1.1.19 Syntax: Octet String
|
Read-only
|
Applies to devices with an LED for media type. It contains an octet
string with 64-bits per slot. The value of each bit can be one of the following: - 0 - Half-duplex
- 1 - Full-duplex
|
snAgentBrdSpeedLedString brcdIp.1.1.2.2.1.1.20 Syntax: Octet String
|
Read-only
|
Applies to devices that have an LED for traffic speed. Contains an
octet string with 64-bits per slot. The value of each bit can be one of the following:
|