Agent global group

brcdIp.1.1.2.1.1

Syntax: Integer

Read-write

Reboots the agent. The following values can only be read:

• other(1) - Agent is in unknown or other state.
• running(2) - Agent is running.
• busy(4) - Reload is not allowed at this time as flash is busy.

The following value can be written:

• reset(3) - Do a hard reset.

brcdIp.1.1.2.1.2

Syntax: Integer

Read-write

Erases the NVRAM of the agent. This object can have one of the following values:

• normal(1) - NVRAM is not being erased.
• error(2) - Either the erase operation failed or the flash memory is bad.
• erasing(4) - NVRAM is being erased. If the process starts, you cannot set this object to erase(3) until the process is finished and the value of this object is either normal(1) or error(2).
• busy(5) - Operation is not allowed at this time as flash is busy.

The following value can be written:

• erase(3) - Erase operation.

The agent returns a response even before the erase operation is complete. The read values will be erased until the erase operation is finished. New erase requests will be rejected until an error(2) or normal(1) value is obtained.

brcdIp.1.1.2.1.3

Syntax: Integer

Read-write

Saves all configuration information to NVRAM of the agent. The following values can only be read:

• normal(1)
• error(2) - Operation failed or the flash is bad.
• writing(4) - Agent is writing to NVRAM flash.
• busy(5) - Operation is not allowed at this time as flash is busy.

The following value can be written:

• write(3) - Write operation.

The agent returns a response even before the write operation is complete. The read values will be written until the write operation is finished. New write requests will be rejected until an error(2) or normal(1) value is obtained. This object requires a password to be set for the snAgGblPassword object.