qos
monitor-queue-drop-counters
Configures the port that the
RUCKUS ICX 7150 device monitors for the incrementing of the egress queue drop counters.
Command Default
By default, egress queue drop counters are associated with the local CPU port that the device monitors for control packet drops.
Parameters
Modes
Global configuration mode
Usage Guidelines
This command is supported only on the RUCKUS ICX 7150.
The device has one set of queue drop counters that must be associated to a port. Only one port in a device can be monitored.
Use this command when traffic loss occurs on a port and you want to verify if the queue drop counters increment.
The no form of the command
resets the monitoring of the internal local CPU port.
History
| Release version | Command history |
|---|---|
| 08.0.60 | This command was introduced. |