`pdu-rate (EFM-OAM)`

Configures the number of Protocol Data Units (PDUs) to be transmitted per second by the Data Terminal Equipment (DTE).

Syntax

pdu-rate value

no pdu-rate value

Command Default

The default value is one PDU per second.

Parameters

value: Specifies the number of PDUs to be sent per second. The value range can be from 1 through 10 PDUs per second.

Modes

EFM-OAM protocol configuration mode

Usage Guidelines

If the PDU rate is configured as 10 packets per second, PDUs may not get transmitted in a timely manner according to the configured PDU rate.

The no form of the command restores the default value of one PDU per second.

Examples

The following example configures the PDU rate as 6 PDUs per second.

device(config)# link-oam
device(config-link-oam)# pdu-rate 6

History

Release version	Command history
08.0.30	This command was introduced.

pdu-rate (EFM-OAM)