packet-inerror-detect

Enables the monitoring of a port for inError packets and defines the maximum number of inError packets allowed for the port during the configured sampling interval.
Syntax
packet-inerror-detect inError-count
no packet-inerror-detect inError-count
Command Default

The Packet InError Detect feature is disabled for the port.

Parameters
inError-count
Specifies the maximum number of inError packets that are allowed for a port during the configured sampling interval. The value can range from 10 through 4294967295.
Modes

Interface configuration mode

Usage Guidelines

The no form of this command disable monitoring of inError packets for the port.

If the number of inError packets received at a port exceeds the default value for two consecutive sampling windows, the port is set to the error-disabled state.

Note: To enable monitoring of inError packets for the port only, you must first use the errdisable packet-inerror-detect command in global configuration mode to globally enable monitoring for inError packets on the device.
Examples

The following example displays the maximum number of allowed inError packets for a port set to the value 10. 

device(config)# interface ethernet 1/1/1
device(config-if-e1000-1/1/1)# packet-inerror-detect 10
History
Release version Command history
07.3.00g This command was introduced.
Parent topic: Commands O, P, Q, R, and Sa through Sh