qos egress-buffer-profile port-share-level

Configures an egress buffer profile for the share port level.
Syntax
qos egress-buffer-profile user-profile-name port-share-level level
no qos egress-buffer-profile user-profile-name port-share-level level
Command Default

The default egress buffer profile level is level4-1/9 for 1/9 of the buffers in buffer memory.

Parameters
user-profile-name
Specifies the name of the egress buffer profile to be configured.
level
Specifies the number of buffers that can be used in the buffer memory. The following levels are supported.

Supported Levels

Level Sharing-pool buffers

level3-1/16

1/16 of the buffers in buffer memory

level4-1/9

1/9 of the buffers in buffer memory

level5-1/5

1/5 of the buffers in buffer memory

level6-1/3

1/3 of the buffers in buffer memory

level7-1/2

1/2 of the buffers in buffer memory

level8-2/3

2/3 of the buffers in buffer memory

Modes

Global configuration mode

Usage Guidelines

This command is supported for RUCKUS ICX 8200 and ICX 7150 devices only.

After creating the profile, you can attach it to one or more ports.

You must use the no egress-buffer-profile command to detach a profile from any ports that are using it before you can configure the no qos egress-buffer-profile command to delete it.

The no form of this command resets the egress buffer profile level to its default value of level4-1/9 for 1/9 of the buffers in the buffer memory.

Examples

The following example creates an egress buffer profile named egress2 with a maximum of 1/16 of the buffers in buffer memory. 

device# configure terminal
device(config)# qos egress-buffer-profile egress2 port-share-level level3-1/16
History
Release version Command history
08.0.60 This command was introduced.
Parent topic: Commands O, P, Q, R, and Sa through Sh