radius-server retransmit

Configures the maximum number of retransmission attempts for a request when a RADIUS authentication request times out.
Syntax
radius-server retransmit number
no radius-server retransmit number
Command Default

The default retransmit number is three retries.

Parameters
number
The maximum number of retries the RUCKUS software retransmits the request. The valid values are from 1 through 5. The default is 2.
Modes

Global configuration mode

Usage Guidelines

When an authentication request times out, the RUCKUS software retransmits the request up to the maximum number of retransmission tries configured.

From FastIron 09.0.10b, this command is not available when TLS is configured for RADIUS server connections because retransmissions are not required for TLS.

The no form of the command removes the configuration.

Examples

The following example shows how to set the retransmission number to 4. 

device(config)# radius-server retransmit 4
History
Release version Command history
09.0.10b The command is disabled when TLS is configured for RADIUS server connections.
Parent topic: Commands O, P, Q, R, and Sa through Sh