`qos egress-shape-ifg-bytes`

Configures egress shaper IFG bytes.

Syntax

qos
                  					egress-shape-ifg-bytes

value-in-bytes

no qos
                  					egress-shape-ifg-bytes

value-in-bytes

Command Default

By default, a value of 20 bytes is configured.

Parameters

value-in-bytes: Specifies the number of preamble and IFG bytes to be added to egress shaping in the range 1 through 127.

Modes

Global configuration mode

Usage Guidelines

This command is supported on ICX 7150, ICX 7650, and ICX 8100 devices only.

It is recommend to use a value greater than or equal to 20 bytes.

The no form of the command restores the default value of 20.

Examples

The following example configures an egress shaper IFG bytes value of 25.

device# configure terminal
device(config)# qos egress-shaper-ifg-bytes 25

The following example restores the default egress shaper IFG bytes value of 20.

device# configure termnial
device(config)# no qos egress-shaper-ifg-bytes 25

qos egress-shape-ifg-bytes